Dell Precision T3600 front I/O panel pinout

[fdistorted]

Please help me to turn on my workstation without the front panel.

I need to find out what pins to short because the front panel is broken.

What is the pinout of the 28 pin connector?

[RoHe]

Dell doesn't make that info public. So unless somebody else has mapped that connector or you  can do it yourself....

You might want to read this thread on the same topic, too...

en.community.dell.com/.../20011305

Exactly what's wrong with the front panel?

[fdistorted]

Thanks for the topic link.

I just got that the problem is with wires and I don't need to know the pinout.

I just need to solder the wires by matching the numbers of pins of both connectors

[RoHe]

If you just need to replace the cable from motherboard to front panel, you can contact Dell Spare Parts to order a new one.  

In the USA, call 1-800-357-3355 and have your Service Tag available. They're open 7 days a week during normal business hours in the USA Central Time Zone.

Outside USA, contact Dell Tech Support for your country or region.

[speedstep]

its not a connector its cables and a board.  Depends on Mini Tower or Desktop Size etc.  

Dell Precision T3600 T5600 I/O Front Panel Power Switch w Cable Dell Precision T3600 T5600 Front I/O Panel w/Cable P4KXN H1F7N TFWN2

https://www.amazon.com/Dell-Precision-T3600-T5600-Switch/dp/B00N123L5U/

T3600 T5600 Front I/O Panel Power Switch K974W 0K974W

[fdistorted]

Sorry but I did not get you. Could you please clarify meant by "its not a connector its cables and a board."?

[speedstep]

Pinouts are not documented and its not just wires going to single connectors on the motherboard.

The information you are requesting is not published and will not be.

There are multiple cables going into a "front panel circuit board" its not a single cable or connector.  Its many cables clustered on a board at the front of the case mounted on a bracket.

precision-t3600_owner's%20manual_en-us.pdf