Highlighted
sysadminplus
1 Copper

Dimension 9200 Power Supply Removal

Jump to solution

Here's the scenario: We have a dimenion 9200 workstation that wouldn't power up. We deduced that the power supply was dead. There were no lights, no signs of power, so I found a replacement supply, and set about removing the old one. I've gotten all of the cables unhooked, and removed the screws holding the power supply to the rear end of the case. However now, there's something under the power supply holding it to a bracket. How do I unhook the power supply to remove it from the case?

Thanks in advance for any replies.

0 Kudos
1 Solution

Accepted Solutions
7- Thorium

RE: Dimension 9200 Power Supply Removal

Jump to solution

Its a hook you Press down so that you can Slide it forward slightly and out.


 

  1. Remove any cables from the cable routing clip on the power supply.

  2. Remove the four screws that attach the power supply to the back of the computer frame.

  3. Press the release button located on the floor of the computer frame.

  4. Slide the power supply approximately 1 inch towards the front of the computer.

  5. Lift the power supply out of the computer.


Report Unresolved Customer Service Issues
here

I do not work for Dell. I too am a user.

The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support






Get Support on Twitter @DellCaresPro

2 Replies
7- Thorium

RE: Dimension 9200 Power Supply Removal

Jump to solution

Its a hook you Press down so that you can Slide it forward slightly and out.


 

  1. Remove any cables from the cable routing clip on the power supply.

  2. Remove the four screws that attach the power supply to the back of the computer frame.

  3. Press the release button located on the floor of the computer frame.

  4. Slide the power supply approximately 1 inch towards the front of the computer.

  5. Lift the power supply out of the computer.


Report Unresolved Customer Service Issues
here

I do not work for Dell. I too am a user.

The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support






Get Support on Twitter @DellCaresPro

sysadminplus
1 Copper

RE: Dimension 9200 Power Supply Removal

Jump to solution

Perfect!!!!!! I finally got it out. Thanks so much for your prompt response!

0 Kudos