I will try to make this short and simple, I have a Dell Inspiron Desktop 531 I got in 2008 with Vista on it. I upgraded to Windows 7 about 8 months ago with no problems. Last week there was a problem with my computer that is would not work with my wireless router. It would connect if I hooked it up to modem only by its self but other wise would not go on line. I tried everything I could to fix the problem but it would not go on line. I had to use windows 7 disk to do an install and I did a clean install which I had did before and not had a problem. For some reason this time it will not take the product key it keeps saying it was for an upgrade only not a clean install. well I called Microsoft and no help from them they say to install vista and then upgrade but when I did the install this time it took vista off my computer. I never got a disk and where my back up disk is well who knows. How do I solve the problem Microsoft says that Dell is blocking the product key.
When you install win 7 with the update dvd, do not enter the key. Once windows is installed do an upgrade install and then enter the key when requested.
does this mean I need to reinstall windows 7 again then not put the key in then do an upgrade install as I said it wiped the disk so I have not Vista disk to up grade with just is unreal I have to do this how many times to fix the problem
do this. Install the Os when it asked to activate do not, click the option to active later. Once the you have it installed, put the disk back in and select the option to upgrade your version of windows. Once it goes through the upgrade reinstall you will now be able to use the key to active. What you are basically doing is upgrading the upgrade.
I know this works I used this on two separate systems to install my copies of win 7 pro
Home Built Sandy Bridge P8P67 i7 2600k @ 4.5 GHz 8gigs GSkill Ripjaws. Corsair 800D Case and AX1200 Ps X-Fi Titanium Fatal1ty pro PCIe Sound Card
Dell Studio XPS 1645 Window 10 Pro
Forum member since 2003
First up, let's define what it is I'm describing. For purposes of this discussion, a clean install--or what Microsoft calls a custom install--is when you boot your PC with Windows 7 Setup media (typically a Setup DVD, but with this version it could also be a specially created, bootable USB memory device containing the Setup bits) with the intention of installing just Windows 7 on the PC. There could be a previous version of Windows (XP or Vista) installed on the PC already. You will either install Windows 7 to a separate partition or will wipe out the previous Windows version during Setup. If it's the latter, please--please--be sure to backup all your data first. Please.
A clean install with Upgrade media is just what it sounds like: You will perform a clean install of Windows 7 using an Upgrade version of Windows 7, instead of the so-called (and more expensive) "Full" version. Upgrade versions of Windows 7 are far more common than Full versions, both because they are less expensive and because Microsoft offered (and in some cases is still offering) exceptionally cheap pricing on Upgrade media.
Note: One such special offer, the Windows 7 Family Pack, consists of 32-bit and 64-bit Windows 7 Home Premium Upgrade media Setup discs and a single product key which can be used to activate three copies of the OS on three different PCs. The Family Pack costs $150, or just $30 more than a single copy of Windows 7 Home Premium Upgrade. It's kind of a no-brainer. But rememeber what you're getting there: The Family Pack comes with Upgrade, not Full, product keys.
But here's the paradox. While anyone with a valid, licensed copy of Windows XP or Vista qualifies for any Upgrade version of Windows 7--and by the way, that's pretty much every single PC user on earth--only Vista users can do an in-place upgrade, which is the install type for which Upgrade media is optimized. If you're an XP user, there's no way to do an in-place upgrade. So you have to perform a migration, which consists of three steps:
1. Backup your crucial data and settings using Windows Easy Transfer (it's on the Windows 7 Setup DVD) and make note of the applications that are installed, because you'll have to manually reinstall them again after the fact.
2. Perform a clean install of Windows 7 using the Upgrade media. I describe this process in this article.
3. Restore your crucial data and settings using Windows Easy Transfer (part of Windows 7) and then reinstall your applications.
Put simply, there are millions of people out there who will be performing clean installs with Upgrade media. Many people have experienced issues with Windows 7 upgrades, especially those trying to do clean installs with Upgrade media, but if you follow the advice in this article, you will get up and running. You will get a legally activated, legitimate version of Windows 7 installed on your PC.
Is this process bulletproof? I'm not sure yet, but I think so. In any event, here's a checklist of things to try, in order from least painful to most painful. One of these methods will work for you.
Note: In all of these methods, you should observe one simple rule. Do not enter your product key during Setup. Instead, you will attempt to activate Windows 7 manually after it is installed. So you can just enter your product key later.
Before we get started, here are some general guidelines to help you understand what will and won't work during Setup with Upgrade media. These tips and tricks represent the bulk of the information we didn't have before Microsoft shipped Windows 7 to millions of people in October 2009. Each of these was confirmed by the team at Microsoft that created the Windows 7 Setup technology.
Many, many readers report that they have been able to simply treat the Windows 7 Upgrade media as if it were Full media, and that it just works. And you know what? It doesn't hurt to simply try this method, because if it doesn't work, you can then try methods 2 and then 3, in order, afterwards. There is no downside to trying this.
Here's what you do. Insert the Windows 7 Upgrade DVD in your PC's optical disc, reboot the computer, boot off the DVD, and then follow the steps to install Windows 7. If you are installing onto a computer that already has another version of Windows, be sure to back everything up first.
After Windows 7 is set up, and you've booted into the desktop, run Windows Update, download any pending updates, reboot as needed, and repeat until there are no more updates. Then, type activate in Start Menu Search to bring up the Activate Windows utility. Type in your product key and attempt to activate Windows.
If it works, you're all set. You're done. Congratulations.
Here's what you do want to see.
If this does not work, either call Microsoft Support and have them provide you with an activation code, or move on to method 2.
Here's what you don't want to see. But don't worry, we can overcome this.
Note: This workaround is not supported by Microsoft but my understanding is that it has a 100 percent success rate. If you are nervous that performing this workaround will lead to later complications--unlikely, but not impossible--please use Method #3, below, instead. Method #3 is supported by Microsoft.
Open regedit.exe with Start Menu Search and navigate to:
Change MediaBootInstall from "1" to "0". (Double-click it and then enter 0 in the dialog that appears.)
Open the Start Menu again and type cmd in Start Menu search to display a shortcut to the Command Line utility. Right-click this shortcut and choose "Run as administrator." Handle the UAC prompt.
In the command line window, type: slmgr /rearm
Then tap ENTER and wait for the "Command completed successfully" dialog.
Then, close the command line window and reboot. When Windows 7 reboots, run the Activate Windows utility, type in your product key and activate windows.
If it works, you're all set. You're done. Congratulations.
If this does not work, you can try two different things:
First, ensure there are no pending Windows Updates to install. In my experience, some of these can cause this method to fail. Install them and reboot PC. Re-run the command line (with administrative privileges) noted above, reboot again, and re-attempt the activation.
If that does not work, try Method #3.
If the above two methods fail, you can always fall back on the old "double install" method that I previously documented for Windows Vista. This workaround is fully supported by Microsoft. There's already a whole article dedicated to this topic, but here's the short version since you've already done the initial install:
1. Insert the Windows 7 Setup DVD in the optical drive if it isn't already there and choose Run Setup from the auto-run dialog that appears. Or, if it is already inserted, navigate to the optical drive in Computer and double-click is icon to trigger Setup.
2. At the appropriate stage of Setup, choose Upgrade (and not Custom). Windows 7 will install as before, though you might notice that it takes quite a bit longer this time. Because you're upgrading this time, you won't be prompted to enter your user name or most of the other information that you need to provide during a clean install. Using the user name (and password) you created during the first install, logon to Windows 7.
Now, activation will work. To activate Windows 7 immediately, type activate in Start Menu Search. This brings up the Activate Windows utility. Type in your product key and attempt to activate Windows.
The methods described above will work for just about anyone and at least two of these methods are supported by Microsoft, if you're a valid, licensed owner of a previous Windows version. (Which is, of course, the assumption.) And remember that you can also take advantage of Microsoft's free support line if you need or want to activate otherwise. However you do it, these tips, tricks, and workarounds should get you up and running in Windows 7 legally, safely, and easily. My only regret is that it took so long to get this information out to you. Hopefully, with the next Windows version, the Upgrade process will be more well known before the product launches.