Start a Conversation

Unsolved

This post is more than 5 years old

S

8310

June 29th, 2007 02:00

M90 w Quadro FX 3500M : max resolution on external DVI?

Before I buy this laptop, I 'd like to find out what the maximum external monitor resolution, from the Quadro FX 3500M (512). Oddly enough, this information in nowhere on the Dell Website or NVidia! Anybody have a clue -- or where to look? This M90 is a lot of money and it seems like a logical question. I plan to hook this up to a LCD tv that run 1080p, or 1920 x 1080.

2.6K Posts

June 29th, 2007 19:00

It will for sure do 1920x1200 (Dells 24" and 27" LCD sizes). If it says it is a dual link DVI then it can do 2560x1600. I checked and it does have dual link (DVI-D) so it will do the following,
* Example display modes (single link):
o HDTV (1920 × 1080) @ 60 Hz with 5% LCD blanking (131 MHz)
o UXGA (1600 × 1200) @ 60 Hz with GTF blanking (161 MHz)
o WUXGA (1920 × 1200) @ 60 Hz (154 MHz)
o SXGA (1280 × 1024) @ 85 Hz with GTF blanking (159 MHz)
o WXGA+ (1440 x 900) @ 60 Hz (107 MHz)
* Example display modes (dual link):
o QXGA (2048 × 1536) @ 75 Hz with GTF blanking (2×170 MHz)
o HDTV (1920 × 1080) @ 85 Hz with GTF blanking (2×126 MHz)
o WQXGA (2560 × 1600) @ 60 Hz with GTF blanking (2x174 MHz) (30" Apple, Dell, HP, Quinux, and Samsung LCDs)
o WQUXGA (3840 × 2400) @ 33 Hz with GTF blanking (2x159 MHz)

Message Edited by tphillips63 on 06-29-2007 04:04 PM
No Events found!

Top