Unsolved
This post is more than 5 years old
2 Posts
0
1387
Optiplex 3010 OSD task sequence restarts upon first reboot
Hi, I created an SCCM task sequence for a Windows 10 deployment. For one of my scenarios I also need to stage from an USB disk. Both the network and USB staging processes work as expected, except for one specific model in our park (Dell Optiplex 3010).
The phenomenon we observe is that after starting the staging from the USB disk and when the OS deployment and driver installation is completed, the process is supposed to reboot the machine and continue with the next steps of the task sequence. What happens though, is that upon reboot, the process restarts from the beginning. The only way I found to get around this is to remove the usb disk when the machine reboots and plug it back in when prompted.
Which changes do I have to make so that it works on the 3010 as it does on all other models (Optiplex 3020, Optiplex 5040 Optiplex 5050, Optiplex 7020) where it simply works as expected ?
Thanks for your pointers,
Stephane
robert p
9.4K Posts
0
November 15th, 2017 03:00
Hi bouillons,
Thanks for posting.
Here is some information from Microsoft's knowledgebase that may be helpful.
http://dell.to/2htfsUk
http://dell.to/2hwAPEh
http://dell.to/2hwAQbj
bouillons
2 Posts
0
November 15th, 2017 06:00
Thank you, we followed these steps to create our USB media, and it works for some models in our park, but not on the Optiplex 3010. The staging process is identical for all the machines.