Highlighted
barry1502
Not applicable

Run 6 monitor display on Dell T110

Hi all, We got a new 6 monitor display for our operations group. I wanted to reuse a Dell T110 I have to drive the displays. There is 8Gb of memory installed on the server and Windows 2008 R2 64 bit is the OS. I bought and installed two new ATI graphics cards - ATI Firepro MV 2460. (4 DVI). - in Slot 2 ATI Firepro 2270 (2 DVI) - in Slot 3 Either card works ok on it's own, but when both installed together I get a Code 12 Device Cannot Find Enough Resources which knocks out the 2460 card. I have updated bios and all related drivers to latest level including ATI drivers for the graphics cards. For now I have removed the 2270 card and am just driving 4 of the 6 monitors off the 2460 card and all working ok with this. Anyone got any ideas on how to get around this code 12 device error ? or is this just too much for the T110 ? Thanks.
0 Kudos
1 Reply
8 Krypton

Re: Run 6 monitor display on Dell T110

The T110 is not an SLI or Crossfire motherboard.

You need a Matrox M9188 PCIe x16 or EYEFINITY 6 Card.

The Matrox M9188 PCIe x16 multi-display Octal graphics card addresses the need to visualize large amounts of data at once

High End Eyefinity cards do this also.

Servers DO NOT SUPPORT GAME Graphics

WINDOWS Server DOES NOT Support DirectDraw acceleration, Direct3D, or texture acceleration.


Report Unresolved Customer Service Issues
here

I do not work for Dell. I too am a user.

The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support






Get Support on Twitter @DellCaresPro

0 Kudos