Highlighted
ubearcat
1 Copper

T7500 green power button 3 4 green lights, takes several attempts before getting boot screen

have a T7500 that when rebooted, will take anywhere between 10-15 shutdown/startups before getting boot screen. Power button is green and 3 4 stay green when it is attempting to boot. I can't find what error this might indicate... any help would be much appreciated...

Thanks

Travis 

0 Kudos
3 Replies
Moderator
Moderator

RE: T7500 green power button 3 4 green lights, takes several attempts before getting boot screen

ubearcat,

The led error represents ACPI S3 Suspend to RAM Windows Standby State. Try the steps below to resolve.

Changing the power management options in the operating system

Sometimes just changing the software settings in the operating system power options will fix the issue. Access to the power options in Windows can be done through the Control Panel. Depending on your version and view by settings, you may or may not see a power option link. In that case, look for power options under the hardware category. Once there, create a new plan or modify an existing plan, changing the advanced settings as needed.

If changing the operating systems power options does not fix the problem, you can try changing the APCI setting to the computers Basic Input/Output System (BIOS).  Once there, you need to look for Power Management Options. There you will find the different ACPI standby states.

0 Kudos
ubearcat
1 Copper

RE: T7500 green power button 3 4 green lights, takes several attempts before getting boot screen

Thanks Jesse ... forgot to mention, none of the lights are blinking... just solid green when attempting to reboot... so solid power, solid 3 4

0 Kudos
Moderator
Moderator

RE: T7500 green power button 3 4 green lights, takes several attempts before getting boot screen

Hi Travis,

That would actually indicate a memory issue:

"Memory subsystem configuration activity is in progress. Appropriate memory modules were detected but a memory failure has occurred."

I would try re-seating the memory to see if that helps. If it doesn't, and if you have more than one stick of memory, try them individually in slot 1 to see if it's a single stick that is causing the error.

If they all fail, try them in the other slots (one at a time) to see if it's a particular slot that is failing.


DELL-Alasdair R
Social Media Support
#IWork4Dell
I'm based in the UK and I'm usually available Monday to Friday 10am-5pm GMT (BST)
Get Support on Twitter @DellCaresPro


0 Kudos