Hi, as stated I have a Vostro 200 Slim, I bought an Asus EAH3450 PCI-e low profile, card works ok on another computer, in the Vostro I don't get any video, if I change the VGA conector to the onboard video with the computer on there's a screen saying that I must disconnect that cable and connect it to the new card, which is what I already did, its like the onboard video keeps detecting the monitor even if it isn't plugged in anymore, any ideas??? TIA
Solved! Go to Solution.
I found a solution. Well, for the Vostro 220, but I think it will work for your issue. Go to my computer and right-click - select manager. Expand display adapters and then right click on the first one and select disable. Mine is an Intel (not sure on the specofoc model). Then reboot the PC with your VGA or DVI cable connected to the Nvidia card. You might want to check the BIOS to see if you have the PCI-express card enabled on boot. This was under my advance chipset options. Then install the Nvidia drivers if they have not been installed. I have an Nvidia Quad 290 PCI-e and have done this with a 280 PCI. I only have this issue with Vostros as I have done this with HP's and was easy plug and play, install driver. After the reboot alter your graphics options through Nvidia control panel. Hope this helps.
I too had the same problem, even after installing the latest BIOS, changing the BIOS setting to PCI-e, even installing a fresh copy of Windows. We found an interesting solution though. I spoke to Dell and they sent a technician out to replace the M/B. With the new M/B we had the same issue. The Vostro shipped with 3Gb of RAM (2 x 1GB and 2 x 512MB) and I suggested that the only thing that I had not tried was changing the RAM, not really expecting that that was the problem. I happen to have 4Gb (2 x 2GB) in stock so we tried that and everything worked perfectly. We could not believe that the RAM could cause the problem. The technician then placed the 2 x 1Gb that originally shipped with the Vostro in and they worked perfectly as well. He then placed the 2 x 512Mb in by themselves and they worked as well. He then put the 2 x 1Gb and the 2 x 512Mb in and the problem was back again. The technician contacted Dell and they arranged for 2 x 2Gb to be supplied the following day and all has run perfectly ever since.
Other proven solution for Dell Vostro 220 & NVdia Ge 210 PCIe incompatibility issue :
1.Set Bios Advance Chipset Feature Init Display First to PCIex by pressing + or - .
2.Check RAM & remove 512M if any.
3.Reboot & install NVdia driver.
Glad to help & share,
Running into the same problem with an ATI Radeon 2400 Pro. I put the card in, hook up a monitor (VGA) and nothing happens...but if I hook the monitor into the onboard video, during the boot process it tells me another video card is connected and that I need to reboot with the monitor hooked up to the new card. It will then let me bypass and boot into Windows XP but the Radeon 2400 cannot be detected once I'm in Windows.
Anybody have any advice?
Ditto me too.
nVidia 7200 GS, works in other non-Vostro pcs.
Get message at bootup to hook up to vid card then reboot. After reboot, I have on board video, but vid card is not detected.
I haven't found a solution yet, but seems like they put an useless PCI-e port on our Vostros, I was just minutes from buying another Vostro 200 motherboard thinking that the fault was only on mine, at least now I know I am not alone in this boat, perhaps Dell could help us with a BIOS update or at least giving us a list of which video cards do work, from robmazco we now know that the problem is not limited to ATI cards but to nVidia aswell, hope we get a response soon
Another "update" hoping for more some support from the DELL guys, tried an old PCI (not PCI-e) video card and it works, went into the BIOS to the Init Display option and I can switch there which card I want to boot from... the Onboard or the PCI, then I noticed there's no PCIEx Option as the manual states, click HERE for the user manual as a reference, then I installed my PCI-e video card hoping that magically the PCIEx option was going to appear, again, nothing... no PCIEx to be seen, I even hooked up a second monitor to the PCI-e card just to check if the option only appeared once the monitor is detected, but as expected, nothing happened, at the end I realized two things, one: DELL gave us a nice PCI-e slot just to let us see how it looks, but it won't work no matter what, tried several PCI-e Cards from different vendors (ATI and NVIDIA) and several BIOS versions, from the 10.0.10 to the latest 10.0.15 and two: people should never buy again from DELL if they are expecting to upgrade their computers or at least have some valuable technical support when something goes wrong.
When a PCIe x16 video card is installed and the monitor is connected to it, boot up the PC and go into the bios. In the Advanced Chipset Features -Init Display First, you should see two options:
It doesn't show up, I never get video from any PCI-e card, as I say on my first post, I have to switch the monitor with the computer on back to the onboard just to see the message about having the monitor connected to the wrong card, that's why I connected another monitor to the PCI-e so I can get into the BIOS and check if PCIEx shows, it is as if the onboard video keeps detecting a monitor when there is none connected
Try re-connecting the onboard video and re-flashing the Bios. When finished, boot into windows, Shut down. Add the card and go back into the Bios and look for the PCIe-X setting.
Hi Chris. I just did that, had to reflash the Bios on DOS since the Windows application didn't work because the Bios was the same version that I had installed, BIOS reflashing went ok but still no PCIe-X setting, tried 3 different PCI-e cards, one ATI and two NVidias with the same result and the same screen saying that the monitor is connected to the wrong card... any other ideas?
I bought a PNY Geforce 210 PCI-e card for Vostro 200 Slim which also did not work despite all of the above maneuvers. (re-flash the Bios, etc) . I also attempted to install it in safe mode. Since I didn't know about these posts I called PNY and the the technician at PNY told me to try the video card in another computer to see if it was the PCI-e slot or the card and in a Vostrol 220 it apparently blew out the motherboard! I actually got some video on the Vostro 200 but it was unreadible psychedlic and the mouse icon was a 1 cm square. PNY replaced the video card and the same thing with the second card. Is there any PCI-e card that really does work?? Is Dell going to help find out why the PCI-e slot doesn't apparenly work? And fix it?