Unsolved
This post is more than 5 years old
9 Posts
0
4516
XPS 700 stop error
i am having a problem with two WD Velocitraptor 74gb drives in Raid 0. trying to load XP Pro. i downloaded nvidia drivers for SATA from the drivers and downloads and tried to load them in with F6. but it still gives me blue screen
Stop: 0x0000007b (0xf78d2524, 0xc00000034,0x00000000,0x00000000)
any help
Message Edited by snox302 on 09-24-2008 11:25 AM
Umbralspace
12 Posts
0
September 24th, 2008 14:00
Initialisation of the I/O system failed (usually the boot device or the file system), Windows lost access to the system volume or boot volume during the startup process. This error always occurs while the system is starting and is often caused by one of the following:
During I/O system initialisation, this error can occur when the controller or driver for the startup device (typically the hard disk) failed to initialise the necessary hardware; The file system initialisation failed because the system did not recognise the data on the boot device. In your case I believe that you are probably running incorrect raid drivers. I will do some research to try to find your drivers or maybe someone here will get to it first.
cd60
289 Posts
0
September 24th, 2008 15:00
snox302
9 Posts
0
September 24th, 2008 16:00
cd60
289 Posts
0
September 24th, 2008 16:00
snox302
9 Posts
0
September 24th, 2008 16:00
i am not restoring this computer. i purchased a XP Pro at a retail store. if that matters any
snox302
9 Posts
0
September 24th, 2008 16:00
Davet50
14.4K Posts
0
September 24th, 2008 16:00
snox302
9 Posts
0
September 24th, 2008 17:00
problems, idecoi.dll now what
set up cannot copy the file: idecoi.dll. i installed the drivers on another floppy and tried that one and still nothing.
cd60
289 Posts
0
September 24th, 2008 17:00
snox302
9 Posts
0
September 24th, 2008 17:00
Thanks, that seems to be working. I unzipped it to the floppy with the drivers on it and overwrote the other .dll. so far so good.
Thanks again.