This post is more than 5 years old
2 Posts
0
143589
upgrade inspiron 530 (ory007)
hello there :emotion-2:
I want to upgrade my 5130,I have now inside the dual core cpu 4400(2.0 ghz).
with a bios versie 1.0.18.
wath i whant is a new dual core,so no Q-core because it is the ory007 :emotion-40:.
I have read that almost al the dual core cpu's fit ,So my eye whas falling on the 7600(3.0 ghz).
now my question>> is the Cpu the only thing i have to buy,and just put in in and Go?
The next thing I have to do is to buy a new power supply,this one is about 300W,
and I whant to go to 500W ore more,with this one inside I can buy a better videocard.
now i hace a gforce 9400gt 512 and i whant to go to at least the gt220 1gig or better card..
Is there someone with the same configuration as i will and what kind of power supply is it then,and it also works:emotion-1: ?
(this al cost around 300euro a new pc a lot more)
Thanks in advance
shesagordie
10 Elder
10 Elder
•
46K Posts
1
April 12th, 2010 12:00
paul62
With the Inspiron 530 ORY007 motherboard, you can use any of the following CPU's
Intel Celeron Processor 420 (1.6 GHz, 800 FSB)
Intel Pentium Dual-Core 2140 (1.6 GHz, 800 MHz FSB)
Intel Pentium Dual-Core 2160 (1.8 GHz, 800 MHz FSB)
Intel Pentium Dual-Core E5200(2.5 GHz, 800 MHz FSB)
Intel Core 2 Duo E4300 (1.8 GHz, 800 MHz FSB)
Intel Core 2 Duo E4400 (2.0 GHz, 800 MHz FSB)
Intel Core 2 Duo E6320 (1.86 GHz, 1066 MHz FSB)
Intel Core 2 Duo E6420 (2.13 GHz, 1066 MHz FSB)
Intel Core 2 Duo E6550 (2.33 GHz, 1333 MHz FSB)
Intel Core 2 Duo E6750 (2.66 GHz, 1333 MHz FSB)
Intel Core 2 Duo E7400 (2.80 GHz, 1066 MHz FSB)
Intel Core 2 Duo E8400 (3.0 GHz, 1333 MHz FSB)
Regards to the power supply, with the Inspiron 530 Mini Tower, you can use most generic standard ATX power supply units, with either a 24-pin or 20+4-pin main motherboard power connector, with or without the on/off switch.
You should be able to buy a compatible power supply from either a local or online computer store.
Note: You require a power supply with four SATA power connectors.
Bev.
paul62
2 Posts
0
April 17th, 2010 15:00
so the E7600 is not there,,bit of shame,thats the 1 that the shop has for me..but i can test it there ,and hope it will work ;-)
thanks for the quick replay..
ps
the shop offerd me a E7600,,,,,,,,,,,,,,kost 146 euro
a recom power 450 plus,,,,,,,,,,,,,,,,,,,, kost 35 euro
and a gforge gt240 (512) with hdmi ,kost 87 euro
------------------------
268 euro ;-)
shesagordie
10 Elder
10 Elder
•
46K Posts
0
April 17th, 2010 16:00
paul62
You are welcome.
Bev.
shesagordie
10 Elder
10 Elder
•
46K Posts
0
October 30th, 2015 14:00
This thread has been locked due to it's age, if you have a similar issue, please use the 'New Post' feature at the top of this page and start a new thread.
Bev.