Hello from Germany
I'm owning a DELL DIMENSION 4600 with 2 SATA sockets.
I would like to add an SSD to that PC.
Question: Does the DELL Dimension 4600 SATA suport SSD ?
As much as I know, SSDs usually requiere SATA II or higher.
What kind of SATA is the one on the DELL DIMENSION 4600 ?
Hello from France!
I hope this post doesn't come too late for you but I only just yesterday upgraded my Dimension 4600 with an SSD
The answer is yes it does work and it has made a huge performance improvment. I put the SSD (which is a 64GB V+100 from Kingston) onto SATA0 on the motherboard and transferred an existing 500GB drive from SATA0 to SATA1 on the motherboard (for some reason Dell doesn't see a disk on SATA1 if SATA0 is unused)
The original IDE 130GB disk which was used just to hold Windows XP was removed after transferring the operating system.
You need to ensure both SATA ports are enabled in the BIOS.
I would highly recommend the SSD I used because it has automated garbage collection (XP does not support the TRIM command) so performance of the SSD should not degrade. I ordered the upgarde bundle which comes with cloning software, drive mountings, SATA cable and power cable. Obviously, you must make sure the used space on the drive you are cloning is smaller than the SSD!
Hope this is of help to you.
The SATA ports on the 4600 are VERY FLAKY. Doubt it will work at all with SSD.
Thanks, but it was just for testing purposes--not looking to spend $$ on the 4600--was thinking of turning it into a server, but then I noticed it only had 2 SATA ports--not so good in terms of growth potential.