Highlighted
dwlovell
Silver

Need Part # For Memory Riser Kit for Precision T7400

I tried calling to order memory + risers for the Precision T7400, but the phone tech seemed unable to provide the correct part # for the memory riser cards for the T7400. After he put me on hold to talk to tech support, he said the part # was TY853 which seem to be old poweredge server riser cards and he said they were only "refurb" available. I have a hard time believeing this is the correct part number since the T7400 is a current model high performance workstation and I doubt that the highest performance workstation that Dell makes would require a riser card that is currently discontinued and only availble in refurbished parts.

This machine requires the memory risers to reach above 64GB of memory.

Please help if you have this part #, I cannot find it anywhere. From the manual it looks like a set of 4 risers, with 4 slots per riser. I am not sure if it is a kit or if you have to buy each riser seperately.

Thanks,

David

0 Kudos
17 Replies
dwlovell
Silver

Re: Need Part # For Memory Riser Kit for Precision T7400

To follow-up, I have found that the similar Precision 690 uses parts JF806/JF807 as riser pair that looks like it would work in the T7400. Can someone confirm if these are the correct part #s for memory risers for Precision T7400:

JF806

JF807

0 Kudos
dwlovell
Silver

Re: Need Part # For Memory Riser Kit for Precision T7400

Bump. Anyone? Chris? This is preventing me from ordering about $4,000 worth of memory from Dell.

0 Kudos
Moderator
Moderator

Re: Need Part # For Memory Riser Kit for Precision T7400

I find these part numbers for the T7400 -

F817F Memory Riser
G327F Memory Riser

0 Kudos
dwlovell
Silver

Re: Need Part # For Memory Riser Kit for Precision T7400

Thank you Chris, I appreciate the help!

0 Kudos
GujuMax
Copper

Re: Need Part # For Memory Riser Kit for Precision T7400

Will a memory riser from a 690 work in a T7400?

I'm also looking for a User Manual for Precision T7400. If anyone has it in PDF and could send it to me, would greatly appreciate it. Thanks.

0 Kudos
pixeluk
Copper

Re: Need Part # For Memory Riser Kit for Precision T7400

Hi,

Did you successfully install the risers? I'm thinking of doing the same but I remember when I bought the machine, the Dell site said that a retrofit was not possible.

Thanks.

0 Kudos
chrisT7400
Bronze

Re: Need Part # For Memory Riser Kit for Precision T7400

any update?

0 Kudos
pyite42
Bronze

Re: Need Part # For Memory Riser Kit for Precision T7400

I am interested in using one of these as well.  From what I can tell, all of the parts mentioned above are also for the 690.

If I install one of these, will it run all the memory at 667MHz instead of 800?

0 Kudos
speedstep
Diamond

Re: Need Part # For Memory Riser Kit for Precision T7400

"Will a memory riser from a 690 work in a T7400?"

NO

Machine name: Dell Precision WorkStation T7400
Chipset: Intel 5400 Chipset

Machine name: Dell Precision WorkStation 690
Chipset: Intel 5100 Chipset

Report Unresolved Customer Service Issues here
I do not work for Dell. I too am a user.
The forum is primarily user to user, with Dell employees moderating
Contact USA Technical Support

Get Support on Twitter @DellCaresPro