I have a T 3600 and when i want to install Windows Server 2008 R2 , i have a problem with RAID controller PERC H310.
I found drivers , during instalation process system say "no any HDD found" , i try to load drivers from USB
Browse - and show drivers folder on the USB
unmark chechbox "Hide drivers that are not compatible with hardware on this PC"
then i see list of the drivers ,
I select PERC H310 (from usb F:\drivers\folder\ percsas2.inf) - not working - still no HDD found
PERC H310 Adapter (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Embedded (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Mini (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
PERC H310 Intergrated (F:\drivers\folder\ percsas2.inf) not working - still no HDD found
Please help me to find driver with can be works properly
The drive or drives must be attached to the Raid controller and a Raid container must be installed and formatted BEFORE THE OS install. This is done from the BIOS RAID MENU ON THE Dell Perc H310 /LSI 9211-8i IT Single drive must be set RAID 0 and a container installed.
The container must be configured and drives INITIALIZED by the controller.
F6 drivers are required for non sas drives not attached to the raid
- if your H310 firmware is out of date, it may not be properly supported by the latest driver version:
If that doesn't work, I would try this one. I'm not entirely sure why there are seemingly two very different driver downloads for the H310 controller:
This is not RONCO set it and forget it plug and play.
There is LOTS OF CTRL R playing BEFORE ANY OS is installed.