Ein neues Gespräch starten

Ungelöst

Dieser Beitrag ist älter als 5 Jahre

J

1889

October 6th, 2015 13:00

U2515H Resolution by HDMI

Hi,

i have a U2515U as well as a P2416D Display.

If i connect them by HDMI (not in same time) i never get the maximum resolution of 2560x1440.

My graphic card (Sapphire R5 230 Flex) should be good enough to deliver the resolution.

Does it work only with DisplayPort?

Thanks.

1 Rookie

 • 

5.4K Nachrichten

October 7th, 2015 00:00

Hi,

I did not find the supported resolution by your videocard. But the Club 3D R5 230 supports only following resolutions:

Output Configuration
DVI: 1x Dual Link DVI-D
HDMI: 1x HDMI 1.4a
VGA: 1x
HDCP Ready: YES
RAMDAC: 400MHz
Maximum Resolution analog: 2048x1536
Maximum Resolution Single-Link DVI: 1920x1200
Maximum Resolution Dual-Link DVI: 2560x1600
Maximum Resolution HDMI 1.4a: 1920x1200
Maximum Outputs Simultaneously: 2

So, if both cards use the reference design by AMD it should be the same.

Greetings

Tom

6 Nachrichten

October 7th, 2015 02:00

I have asked Sapphire:

...die Karte ist in der Lage über HDMI bis zu 4k darzustellen, aber wie sieht das mit Ihrem HDMI Kabel aus? Die meisten Kabel können nicht mehr als FullHD.
Mit freundlichen Grüßen
Ihr Sapphire Team Deutschland

This are the resolutions, which the graphic card could provide:

HDMI max. 4K (3840*2160 / 30HZ)
DVI 1: 2560*1600
DVI 2: 1920*1080.

 

So, the graphic card should be able to send the resolution up to 4k.

Could the HDMI cable be the problem? I use this one: 

http://www.amazon.de/dp/B003Z80KEU/ref=pe_386171_38075861_TE_item

https://www.wentronic.de/en/audiovideo-connections/hdmi/connection-cables/1508/high-speed-hdmi-with-ethernet-kabel?ffRefKey=

This should work up to 4k too.

Any further ideas?

1 Rookie

 • 

5.4K Nachrichten

October 7th, 2015 04:00

Hi,

Also wenn du deutsch verstehst, dann schreib ich auch in deutsch. :)

Beim Kabel steht ja:
"max. resolution Full HD 1080p (60 Hz)"

Dann wird es wohl das Kabel sein. Die Monitore machen die Auflösung auf jeden Fall.

Grüße

Tom

6 Nachrichten

October 7th, 2015 13:00

OK, dann halt in Deutsch. :D

Heute habe ich den Monitor an meinem Notebook getestet. Per HDMI wurde gleich die richtige Auflösung angezeigt. Verwendet habe ich das gleiche HDMI Kabel wie bei meinen bisherigen Versuchen am PC.

Damit steht fest: Monitor und Kabel sind schon mal nicht schuld. Laut Hersteller müsste aber auch die Grafikkarte die Auflösung hergeben.

Catalyst zeigt aber an, dass die gemeldete maximale Auflösung bei 2048x1152 liegen würde.

Auch im Gerätemanager wird der Monitor richtig angezeigt.

Ich stehe vor einem Rätsel.

1 Rookie

 • 

5.4K Nachrichten

October 7th, 2015 23:00

Guten Morgen,

Schau mal hier:

http://www.quietpc.com/sap-r5-230-flex

und hier:

http://www.elara.ie/productdetail.aspx?productcode=MMEM311143

Für mich sieht es so aus, als ob die Grafikkarte das nicht via HDMI bringt.

Grüße

Tom

Keine Veranstaltungen gefunden!

Top