Unsolved
This post is more than 5 years old
5 Posts
0
3842
2 issues: Can't PXE Boot - Invalid Partition Table
Hardware: Dell Latitude E5540
My goal is to get it to PXE boot so that I can image the sysprepped OS (Win 10 Education x64 v1511).
What's happening:
I boot from Legacy - DVD or HDD or PXE - I get "Invalid Partition Table"
I boot from UEFI "Windows Boot Manager" or UEFI Hard Drive - goes to Windows
The OS is installed UEFI.
I can't install the OS Legacy due to the "Invalid Partition Table" error.
I don't seem to be able to get to the PXE Boot.
BIOS diagnostics run perfect.
BIOS has been updated to the latest.
Any advice?
hammadi-MA
6 Posts
0
June 5th, 2017 18:00
hi,
did you try to enable the EUFI Network Stack on the EUFI ?
are others machine able to boot through pxe ?
are u using sccm ?
are you sure that the boot .Wim is there and not corrupted ?
heidi.hendry
5 Posts
0
June 8th, 2017 02:00
>did you try to enable the EUFI Network Stack on the EUFI ?
What do you mean?
>are others machine able to boot through pxe ?
Yes. An E5530 was fine.
>are u using sccm ?
No. Filewave.
>are you sure that the boot .Wim is there and not corrupted ?
What do you mean?
pramodtvm
29 Posts
1
June 14th, 2017 23:00
Hello,
I would suggest you to clean your HDD using Diskpart command before starting Legacy Installation.
Regards
Pramod R