I just downloaded the new tool released by dell (http://support.dell.com/support/downloads/download.aspx?c=us&cs=555&l=en&s=biz&releaseid=R306204&SystemID=lat_e6420&servicetag=&os=W764%20&osl=en&deviceid=29611&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=0&libid=41&typeid=-1&dateid=-1&formatid=-1&source=rss&fileid=461656) but I am not able to recognize drives plugged into my Precision WorkStation T7400. I'm running 1 Seagate Momentus 3 HDD (sent by Dell for testing) plugged directly into onboard SATA. I also have a SAS drive plugged into the Dell PeRC SAS Controller and another two 150GB SATA drives plugged in onboard.
When running DellAFDT.exe -r on any of the disks I am getting the following error message: "Disk is a SCSI device. This tool works only with IDE disks."
I can understand seeing the error message when executing against the SAS drive on the SAS/SCSI controller, but why wouldn't the other two show up?
Thanks for the extra info. I'll send it along to the team responsible for the tool. I would suggest that you make sure you that BIOS and chipset drivers and controller firmware are up to date on your T7400 to eliminate those as part of the issue.
I checked this on a T5500 that does NOT have a SCSI/SAS controller and all drives show "IDE" under the Enumerator property so this seems to be a function of the SCSI/SAS Controller overriding this setting.
Will this tool work on SSD drives? SSD drives are technically not AFD per se but they do use 4K sectors with 512-byte emulation. We ran the tool on a SSD and non SSD/non AFD drive and it came back with the status of not an AFD drive and partiotion were aligned. For the SSD this couldnt be correct as Win XP was running on the SSD and the alignment was never manually configured. These are Dell Samsung brand SSD's by the way.