Unsolved
7 Posts
0
3760
Dell Command Update 3.1 return/exit code wrong
I have updated to Command update 3.1 from 2.4 since command line support has now been added. Now I have noticed I no longer get a return code showing a reboot is required.
For example this is part of output from an update log after running using command line:
Downloaded updates (4 of 4)., 330.5 MB of 330.5 MB transferred (100.00%)...
Installing updates (1 of 4). Update Name: Intel Management Engine Components Installer
Installing updates (2 of 4). Update Name: Intel Chipset Device Software
Installing updates (3 of 4). Update Name: Intel HD, HD 4200/4400/4600/5000/5100/5200//5300/5500 graphics driver
Installing updates (4 of 4). Update Name: Intel PCIe Ethernet Controller Driver
Execution completed.
Program exited with return code: 0
3 out of the 4 above drivers require a reboot and I get a return code of 1(reboot) in 2.4 but not in 3.1. Even a BIOS update returns a 0. I know the return codes partially work as I get 500 if no updates were required which is correct. I use the exit code in our management software to execute reboots and rescans so this messes up stuff that happens after the update runs.
Exit codes referenced
| 0 | Command execution was successful | NA |
| 1 | A reboot was required from the execution of an operation | Reboot the system to complete the operation. |
| 500 | No updates were found for the system when a scan operation was executed | The system is up to date or no updates were found for the provided filters. Modify the filters and re-run the commands. |
Jim Koerner
7 Posts
0
January 8th, 2020 10:00
Pulled an update log from a different machine that had a BIOS update to show the same return code of 0 where it should be 1.
Creating system restore point...
Downloaded updates (0 of 0)., 41.3 MB of 41.3 MB transferred (100.00%)...
Installing updates (1 of 2). Update Name: Intel 9x60, 826x, 7265, 3165, and 7260 Bluetooth Legacy Driver
Installing updates (2 of 2). Update Name: Dell Latitude E7450 System BIOS
Execution completed.
Program exited with return code: 0
tkernick
2 Posts
0
February 20th, 2020 15:00
I have the exact same issue.
The reboot flag also does nothing.
Jim Koerner
7 Posts
0
March 2nd, 2020 15:00
I have been working with Dell support on this since I posted here. They got back to me the other day that there is a bug causing this issue and it slated to be fixed in the next release but no scheduled release date at this time.
Jim