Pass Password to .EXE Generated by Command | Configure

Hello all,

I'm having trouble passing a valsetuppwd to a .exe file created using Dell Command | Configure (currently using version 3.2.0). It's just a simple config used to set forcepxeonnextboot=enable

Command used to run it: forcepxeonnextboot.exe  --valsetuppwd=[redacted]

Resulting log (and yes, the correct password IS being entered. Passing that to CCTK.exe works just fine, but requires installation as best I can tell):

[07/18/17 16:17:12]    Self Contained Executable(SCE) Execution Start
[07/18/17 16:17:12]    Original command line: forcepxeonnextboot.exe  --valsetuppwd=[redacted]
[07/18/17 16:17:12]    SCE EXE Version: 3.2.0.0
[07/18/17 16:17:12]    SCE Release: R309560
[07/18/17 16:17:12]    User Command: unattended
[07/18/17 16:17:12]    SCE Capabilities Value: 471859199 (0x1C1FFFFF)
[07/18/17 16:17:12]    SCE Vendor Software Version: 3.2.0
[07/18/17 16:17:12]    Local System/Model Compatible with this Package? Yes
[07/18/17 16:17:12]    Local System OS Version: 6.1.1.0
[07/18/17 16:17:12]    OS Compatible with this Package? Yes
[07/18/17 16:17:12]    Local System OS Language: EN
[07/18/17 16:17:12]    Language Compatible with this Package? Yes
[07/18/17 16:17:12]    User Parameter: valsetuppwd
[07/18/17 16:17:13]    Identified Behavior : unattended
[07/18/17 16:17:13]    Temporary payload log file name: C:\ProgramData\dell\drivers\forcepxeonnextboot\SCEDCD7.tmp
[07/18/17 16:17:13]    Translated Command Line : applyconfig.bat -l="C:\ProgramData\dell\drivers\forcepxeonnextboot\SCEDCD7.tmp" "--valsetuppwd=[redacted]"
[07/18/17 16:17:13]    Path : C:\ProgramData\dell\drivers\forcepxeonnextboot
[07/18/17 16:17:13]    Identified Behavior : unattended
[07/18/17 16:17:18]    Append Vendor Software Log: C:\ProgramData\dell\drivers\forcepxeonnextboot\SCEDCD7.tmp
[07/18/17 16:17:18]    
--- Start of Vendor Software Log ---

[07/18/17 16:17:18]    ASCII payload log file detected.
[07/18/17 16:17:18]    
2017/07/18 16:17:18 cctk - The setup password provided is incorrect. Please try again.
CCTK STATUS CODE : FAILURE
[07/18/17 16:17:18]    
--- End of Vendor Software Log ---

[07/18/17 16:17:18]    Get name of the Folder file: c:\Users\[redacted]\Desktop
[07/18/17 16:17:18]    Vendor Software Return Code: 0
[07/18/17 16:17:18]    Name of Exit Code: SUCCESS
[07/18/17 16:17:18]    Name of Exit Code: SUCCESS
[07/18/17 16:17:18]    Exit Code set to: 0 (0x0)
[07/18/17 16:17:18]    Result: SUCCESS
[07/18/17 16:17:18]    Name of Exit Code: SUCCESS
[07/18/17 16:17:18]    Execution terminated at date-time 07/18/17 16:17:18
[07/18/17 16:17:18]    ######

Any ideas?

Thanks!