Kihen
2 Bronze

Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hello!

I have recently purchased a new Compellent Storage array that I am monitoring through Storage Manager 2016 R3.

I am able to connect my old PS groups to Storage Manager, but cant seem to find any IO Usage or Charting data. 

Is this even possible or do I still have to use SANHQ for that?

 

Best Regards

Kim

 

0 Kudos
1 Solution

Accepted Solutions
DELL-Donald Wi
DellEMC

Re: Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hello Kim,

 Here's the online admin guide for DSM.

http://www.dell.com/support/manuals/us/en/04/storage-sc2020/dsm-2016-ag/notes-cautions-and-warnings?...

Under Storage Management there's a section for PS groups

http://www.dell.com/support/manuals/us/en/04/storage-sc2020/dsm-2016-ag/ps-series-storage-array-admi...

There's also a section there for monitoring PS groups.

 Feel free to open a support case as well and they will be happy to help you make sure everything is set up correctly.

 Regards,

Don

 

Social Media and Community Professional
#IWork4Dell
Get Support on Twitter - @dellcarespro

View solution in original post

0 Kudos
4 Replies
DELL-Donald Wi
DellEMC

Re: Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hello Kim,

 Do you have the Data Collector installed? 

That would give you SANHQ like info.

 Regards,

Don

Social Media and Community Professional
#IWork4Dell
Get Support on Twitter - @dellcarespro

0 Kudos
Kihen
2 Bronze

Re: Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hi Don!

Thanks for the reply!

I have the Data Collector installed, but if its correctly configured is another matter.

I have searched, but I cant seem to find any good info on how to install/integrate the PS groups with Storage Manager

 

Best regards

Kim

0 Kudos
DELL-Donald Wi
DellEMC

Re: Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hello Kim,

 Here's the online admin guide for DSM.

http://www.dell.com/support/manuals/us/en/04/storage-sc2020/dsm-2016-ag/notes-cautions-and-warnings?...

Under Storage Management there's a section for PS groups

http://www.dell.com/support/manuals/us/en/04/storage-sc2020/dsm-2016-ag/ps-series-storage-array-admi...

There's also a section there for monitoring PS groups.

 Feel free to open a support case as well and they will be happy to help you make sure everything is set up correctly.

 Regards,

Don

 

Social Media and Community Professional
#IWork4Dell
Get Support on Twitter - @dellcarespro

View solution in original post

0 Kudos
Kihen
2 Bronze

Re: Using Storage Manager 2016 R3 to monitor performance of PS groups

Jump to solution

Hi Don!

 

Same documents that I have found. Still nothing on how to get IO performance data to show from the PS groups. 

I will open a support case and just to make sure everything is setup correctly.

 

Thanks for the help!

 

Best regards

Kim

0 Kudos