Unsolved
This post is more than 5 years old
718 Posts
2
12524
Ask the Expert: EMC M&R (Watch4net) - New Networking and Mobile SolutionPacks for EMC M&R 6.5u1
|
|
Ask the Expert: RecoverPoint for Virtual Machine 4.3 SP1 Ask the Expert: SAN (Connectrix), FC Connectivity Recommendations and Best Practices |
Welcome to the EMC Support Community Ask the Expert conversation. Over the next three weeks we will be covering the New Networking and Mobile SolutionPacks for EMC M&R(Watch4net) 6.5u1. Among the many areas will be discussing, our experts will answer your questions regarding the installation and configuration of these new SolutionPacks as well as providing information on what features these new SolutionPacks are offering. For a full list of the SolutionPacks available for EMC M&R 6.5u1, please see KB article here: 197850 , and documentation here.
Meet Your Experts:
| Isaka Tassile Shoda Technical Support Engineer II Isaka has been working for EMC on the M&R platform since April 2012 and a have a backround in Operations Support. He is a coach and SME for the ASD SAS support team. Isaka has experience with EMC M&R (APG/Watch4net), Service Assurance Suite, ViPR SRM, VNX, Monitoring and Reporting Family. |
|
Support Engineer III Scott has been working in IT for the last 17 years in institution and data center management. He joined EMC May of 2012 and is a subject matter expert (SME), coach and team lead for the AMER SAS support team. Scott has experience with EMC Monitoring & Reporting (APG/Watch4net), Service Assurance Suite (SMARTS), ViPR SRM, VNX Monitoring and Reporting Family. |
|
Technical Support Engineer II Matthew has been working in IT since 2004 in various support (desktop, server, network) and team lead roles. He joined EMC in 2014 and is currently working in the Advanced Software Division for the SAS EMEA support team. Matthew has experience with EMC M&R (Watch4net), ViPR SRM, Smarts, Cisco and Microsoft administration. |
This discussion takes place from March 9 - 27. Get ready by bookmarking this page or signing up for e-mail notifications.
Share this event on Twitter or LinkedIn:
>> M&R #Watch4net, New Networking and Mobile SolutionPacks for EMC M&R 6.5u1, Ask the Expert event. http://bit.ly/1wuXPrT #EMCATE <<
PaulORourke
170 Posts
0
March 9th, 2015 02:00
Hi,
This Ask the Expert discussion is now open for questions. We look forward to a lively and interactive discussion.
To get things started, here is a KB article describing some of the features that the new SolutionPacks offer:
EMC M&R: What features do the new SolutionPacks offer?
Kind Regards,
Paul O'Rourke
RobertoAraujo1
718 Posts
0
March 9th, 2015 06:00
Welcome everyone, this ATE session has began. Our experts are now ready to answer any question you post on this thread. Enjoy!
PaulORourke
170 Posts
1
March 10th, 2015 02:00
Hi all,
Quick summary of the key features in the Smarts SolutionPack for EMC M&R 6.5u1:
https://support.emc.com/kb/198727
Kind Regards,
Paul O'Rourke
nbruce
53 Posts
1
March 11th, 2015 12:00
Good afternoon,
Here are a few more articles with helpful information regarding EMC M&R 6.5u1 Solutionpacks:
What are the System Requirements for EMC M&R 6.5u1
https://support.emc.com/kb/197847
There are some new additions to the upgrade procedure for the NCM Solutonpack.
https://support.emc.com/kb/198743
PaulORourke
170 Posts
0
March 19th, 2015 08:00
Hi All,
Please see KB below for details on how to use the new Send to SAM alert action in EMC M&R 6.5u1 to send Performance alerts from EMC M&R to Smarts Service Assurance Manager (SAM) :
How to use the new Send to SAM alert action
RobertoAraujo1
718 Posts
0
March 29th, 2015 11:00
This ATE event has ended. We would like to thank all those who participated in this discussion, but special thanks to our experts who took their time from their busy schedule to answers our user's questions.
Cheers.
ahmedbahgat1
1 Message
0
March 13th, 2016 01:00
Dear All,
I need to know the capabilities for the watch4net mpls solution pack.
1- Does it provide complete solution to monitor performance of subscriber CE circuits? MPLS L2, MPLS L3 , Etherent, etc.
2- Does it support any of the following standards?
RFC 2544, Y.1564, Y.1731, TWAMP, Delivered Througput for in service PM
Also the documentation link does not open(a link to acrobat reader is displayed)
Thank you