When I turn the laptop on it will not boot to the Operating System, but instead it comes up with ad error message saying:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair you computer."
If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Info: An error occurred while attempting to read the boot configuration data.
After i have done that it comes up with another error.
I have run many diagnostic tests and have received to following error codes:
This one was retrieved from a diagnostic utility built in
Error code 0142 Msg: Error code 2000-0142 Hard drive 0 test unsuccessful: status 79
These two were from the system tree diagnostics found on my driver and utilities disc
Error code 0F00:1332 Msg: DISK- Block 4224: Interrupt request (IRQ) did not send in time.
Error code 0F00:0132 Msg: DISK- Interrupt Request (IRQ) did not send in time.
Then when I tried to reformat the hard drive through reinstalling windows i got this error:
Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installation. Error code: 0x80070057
I have checked the hard drives connections and there OK, i just need to know what to do next.
Any help is greatly appreciated.
Solved! Go to Solution.
Got a 2.5" 250 Gig 7200rpm hard drive and everything is working smoothly. Thanks to all that help me. This hard drive is speedy!
Installed win 7 and this case is solved!