Unsolved
This post is more than 5 years old
3 Posts
0
6849
Dell Inspiron 6000 Inverter
Hi,
I took my problem laptop to a Pro, he decided as inverter problem, replaced with the one he has but then I still have the same old issue with the screen getting dim were page can be viewed in the background, so started searching online and found to my interest inverters go with the part numbers and have to be replaced with the exact part numbers.
So wanted to confirm, does the inverters have to be replaced with the exact part number as the Pro to whom I took didn't replace the inverter with the exact part number.
An also can some one help me in getting the Inverter part # PWB-IV11145T/N4-E-LF.
Thankyou,
Nalinikalyan.
Message Edited by Nallagonda on 05-18-2008 08:46 PM
ejn63
1 Rookie
1 Rookie
•
87.5K Posts
0
May 19th, 2008 08:00
If the inverter didn't solve the problem, you need the bulb replaced, or you have a mainboard issue, not an inverter problem.
Nallagonda
3 Posts
0
May 19th, 2008 19:00
Thanks for the reply but I'm curious to know whether the Inverter should be of the same part number of the replaced one, so that the next step would be determining it's the back tube or the motherboard problem?
Thankyou,
Nalinikalyan.
ejn63
1 Rookie
1 Rookie
•
87.5K Posts
0
May 19th, 2008 20:00
The inverter needs to be the exact same part you had, yes.
They are not interchangeable between models of screen.
Tunipie
8 Posts
0
May 21st, 2008 11:00
Yes-- exact same part number. Hope that helps.