Unsolved
This post is more than 5 years old
48 Posts
0
2720
ConGroup started task problem (mainframe)
ConGroup problem – mainframe environment.
I ’ve a problem with ‘ConGroup’ started task.
When I use SCF version 5.7 and ConGroup version 6.3 – every think works fine.
For a test, I’ve installed new Mainframe Enabler 7.0 (level EMC7002). New SCF works fine, SRDF works too. The problem is with ConGroup started task.
When I start PROC – procedure ended with RC=0 without any other messages:
See a example below:
1 J E S 2 J O B L O G -- S Y S T E M R U T 1 -- N O D E N B R U T
0
19.23.47 STC03160 ---- THURSDAY, 07 JAN 2010 ----
19.23.47 STC03160 IEF695I START EMCCGP WITH JOBNAME EMCCGP IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
19.23.47 STC03160 $HASP373 EMCCGP STARTED
19.23.47 STC03160 IEF403I EMCCGP - STARTED - TIME=19.23.47
19.23.48 STC03160 CGRP000I ConGroup V7.0 (11/09/09-13.55 SCGP700-SC70007) Initializing
19.23.48 STC03160 EMCP001I MODE=SINGLE
19.23.48 STC03160 EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW
19.23.48 STC03160 - --TIMINGS (MINS.)-- -----PAGING COUNTS----
19.23.48 STC03160 -STEPNAME PROCSTEP RC EXCP CONN TCB SRB CLOCK SERV WORKLOAD PAGE SWAP VIO SWAPS
19.23.48 STC03160 - CONGROUP 00 677 168 .00 .00 .0 8031 STCTASKS 0 0 0 0
19.23.48 STC03160 IEF404I EMCCGP - ENDED - TIME=19.23.48
19.23.48 STC03160 -EMCCGP ENDED. NAME- TOTAL TCB CPU TIME= .00 TOTAL ELAPSED TIME= .0
19.23.48 STC03160 $HASP395 EMCCGP ENDED
0------ JES2 JOB STATISTICS ------
- 07 JAN 2010 JOB EXECUTION DATE
- 2 CARDS READ
- 58 SYSOUT PRINT RECORDS
- 0 SYSOUT PUNCH RECORDS
- 3 SYSOUT SPOOL KBYTES
- 0.00 MINUTES EXECUTION TIME
1 //EMCCGP JOB MSGLEVEL=1 STC03160
2 //STARTING EXEC EMCCGP
3 XXEMCCGP PROC SCGPPRFX='EMC.MFE700',
XX SSCFPRFX='EMC.MFE700',
XX CONFIG=CGRPCFG0
XX* THE ONLY REQUIRED DD STATEMENT IN THE JCL IS THE CONFIG DD
XX* STATEMENT. SEE THE CONFIG MEMBER FOR AN EXPLANATION OF THE
XX* CONFIG FILE.
4 XXCONGROUP EXEC PGM=CGRPMAIN,REGION=0M,TIME=1440
5 XXSTEPLIB DD DSN=&SSCFPRFX..LINKLIB,DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.LINKLIB,DISP=SHR
6 XX DD DSN=&SCGPPRFX..LINKLIB,DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.LINKLIB,DISP=SHR
7 XXSYSABEND DD SYSOUT=*
8 XXSCF$ES70 DD DUMMY <- NAZWA DYNAMICZNEGO SSID DLA SCF-A
9 XXCONFIG DD DSN=&SCGPPRFX..PARMLIB(&CONFIG),DISP=SHR
XX*CONFIGCA DD DSN=COMPLEMENTGROUP,DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.MFE700.PARMLIB(CGRPCFG0),DISP=SHR
STMT NO. MESSAGE
2 IEFC001I PROCEDURE EMCCGP WAS EXPANDED USING SYSTEM LIBRARY SYS1.BRUT.PROCLIB
IEF695I START EMCCGP WITH JOBNAME EMCCGP IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
IEF236I ALLOC. FOR EMCCGP EMCCGP
IGD103I SMS ALLOCATED TO DDNAME STEPLIB
IGD103I SMS ALLOCATED TO DDNAME
IEF237I JES2 ALLOCATED TO SYSABEND
IEF237I DMY ALLOCATED TO SCF$ES70
IGD103I SMS ALLOCATED TO DDNAME CONFIG
IEF142I EMCCGP EMCCGP - STEP WAS EXECUTED - COND CODE 0000
IGD104I EMC.MFE700.LINKLIB RETAINED, DDNAME=STEPLIB
IGD104I EMC.MFE700.LINKLIB RETAINED, DDNAME=
IEF285I XEMCUSR.EMCCGP.STC03160.D0000101.? SYSOUT
IGD104I EMC.MFE700.PARMLIB RETAINED, DDNAME=CONFIG
IEF373I STEP/CONGROUP/START 2010007.1923
IEF374I STEP/CONGROUP/STOP 2010007.1923 CPU 0MIN 00.15SEC SRB 0MIN 00.00SEC VIRT 112K SYS 252K EXT 7296K SYS 11676K
IEF375I JOB/EMCCGP /START 2010007.1923
IEF376I JOB/EMCCGP /STOP 2010007.1923 CPU 0MIN 00.15SEC SRB 0MIN 00.00SEC
With the same configuration previous version (with SCF 5.7) – starts and works properly.
See a example:
1 J E S 2 J O B L O G -- S Y S T E M R U T 1 -- N O D E N B R U T
0
19.33.20 STC03161 ---- THURSDAY, 07 JAN 2010 ----
19.33.20 STC03161 IEF695I START EMCCGP## WITH JOBNAME EMCCGP## IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
19.33.20 STC03161 $HASP373 EMCCGP## STARTED
19.33.20 STC03161 IEF403I EMCCGP## - STARTED - TIME=19.33.20
19.33.20 STC03161 CGRP000I ConGroup V6.3 (08/28/08-15.05 SCGP630-SC63014 ) Initializing
19.33.20 STC03161 EMCP001I MODE=SINGLE
19.33.20 STC03161 EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW
19.33.20 STC03161 EMCP001I USE_RDF_ECA=YES
19.33.30 STC03161 CGRP281I BUILD DATE: 08/28/08-15.05 SCGP630-SC63014
19.33.30 STC03161 CGRP112I MIH = 15
19.33.30 STC03161 EMCP001I AUTO_REFRESH=YES YES/NO
19.33.30 STC03161 EMCP001I DISABLE_AT_SHUTDOWN=NO YES/NO (DEFAULT)
19.33.30 STC03161 EMCP001I DISABLE_ON_VERIFY_ERROR=NO YES/NO (DEFAULT)
19.33.30 STC03161 EMCP001I DISPLAY_CONGROUP_LISTOPT=LIST NOLIST/LIST (DEFAULT)
19.33.30 STC03161 EMCP001I PAGEDEV_ALLOWED=NO YES/NO (DEFAULT)
19.33.30 STC03161 EMCP001I REMSPLIT_INTERVAL=10 10 SECONDS (DEFAULT)
19.33.30 STC03161 EMCP001I REMSPLIT_OPTION=NOESTERR
19.33.30 STC03161 EMCP001I RESUME_INTERVAL=10 10 SECONDS (DEFAULT)
19.33.30 STC03161 EMCP001I RESUME_OPTION=NOTRNMSG+RSMALLIT
19.33.30 STC03161 EMCP001I SAF_CLASS=DATASET
19.33.30 STC03161 EMCP001I SAF_PROFILE=EMC.VALIDATE.ACCESS
19.33.30 STC03161 EMCP001I SEMISYNC_ALLOWED=NO YES/NO (DEFAULT)
19.33.30 STC03161 EMCP001I VERIFY_INTERVAL=300 300 SECONDS (DEFAULT)
19.33.30 STC03161 EMCP001I SRDF_CONGROUP=TEST 8 CHAR NAME WITH ONLY SRDF AND STD DEVICES
19.33.30 STC03161 EMCP001I DEVICE_LIST=B02E-B02F ALL/9999/XXXXXX
19.33.30 STC03161 EMCP001I SUSPEND_FAILURE=FAIL RETRY/WTOR/FAIL (DEFAULT)
19.33.30 STC03161 CGRP104I EOS EXITS ARE INSTALLED
19.33.30 STC03161 CGRP050I SUBTASK FOR CONGROUP TEST IS ACTIVE
19.33.30 STC03161 CGRP639I (02) Group TEST Starting polling threads
19.33.36 STC03161 CGRP639I (03) Group TEST Pollers Started
19.33.36 STC03161 CGRP635I GROUP TEST Setting poll rate to 15
19.33.36 STC03161 CGRP639I (04) Group TEST Pollers Initialized
19.33.36 STC03161 CGRP998I 2 polls outstanding. Delaying polls for 000290102206.
19.33.36 STC03161 CGRP635I GROUP TEST Setting poll rate to 1
19.33.36 STC03161 CGRP640I (03) Group TEST Group RECA Clear/Set Started
19.33.43 STC03161 CGRP634I (05) Group TEST All_Mirrors_Ready = TRUE
19.33.43 STC03161 CGRP634I (07) Group TEST All_Mirrors_NR = FALSE
19.33.43 STC03161 CGRP634I (01) Group TEST Zero_Invalid_Tracks = TRUE
19.33.43 STC03161 CGRP634I (03) Group TEST All_Mirrors_Synched = TRUE
19.33.43 STC03161 CGRP634I (15) Group TEST has lost some CG protection
19.33.43 STC03161 CGRP634I (12) Group TEST RDF-ECA defined on no devices
19.33.43 STC03161 CGRP634I (11) Group TEST RDF-ECA disarmed on all devices
19.33.43 STC03161 CGRP640I (09) Group TEST Clear Complete. Group RECA Set Started
19.33.44 STC03161 CGRP634I (13) Group TEST RDF-ECA defined on all devices
19.33.44 STC03161 CGRP634I (08) Group TEST RDF-ECA armed on all devices
19.33.44 STC03161 CGRP635I GROUP TEST Setting poll rate to 15
19.33.44 STC03161 CGRP640I (06) Group TEST Group RECA Set Complete
19.33.44 STC03161 CGRP148I CONGROUP TEST IS ENABLED FOR CTLR=000290102206
19.33.44 STC03161 CGRP149I CONGROUP TEST SUCCESSFULLY ENABLED
19.33.44 STC03161 CGRP143I ENABLE ALL CONGROUP PROCESSING COMPLETED
19.33.44 STC03161 CGRP611I Initialization Complete
1 //EMCCGP## JOB MSGLEVEL=1 STC03161
2 //STARTING EXEC EMCCGP##
3 XXEMCCGP PROC SCGPPRFX='EMC.SCGP630',
XX SSCFPRFX='EMC.SSCF570',
XX CONFIG=CGRPCFG0
XX* CONFG2=CGRPCFG2
XX*
XX* STARA WERSJA CGROUP (6.3)
XX*
XX* THE ONLY REQUIRED DD STATEMENT IN THE JCL IS THE CONFIG DD
XX* STATEMENT. SEE THE CONFIG MEMBER FOR AN EXPLANATION OF THE
XX* CONFIG FILE.
XX*
XX* CONFIG2 DD IS OPTIONAL. USE IF THE CSC IDLEPOLL HAS BEEN CHANGED FRO
XX* THE DEFAULT. OR, THE NEED TO USE A DIFFERENT CSC LISTENER FOR CGRP
XX* (NOT SDAS)
XX**********************************************************************
XX* SMBL: SUB-MSTR (IF YOU ARE RUNNING AUTOSWAP)
XX* MY URUCHAMIAMY 'START'-> S EMCCGRP
XX* STOP EMCCGRP: P EMCCGRP
XX*
XX**********************************************************************
4 XXCONGROUP EXEC PGM=CGRPMAIN,REGION=0M
5 XXSTEPLIB DD DSN=&SSCFPRFX..LINKLIB,DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.SSCF570.LINKLIB,DISP=SHR
6 XX DD DSN=&SCGPPRFX..LINKLIB,DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.SCGP630.LINKLIB,DISP=SHR
7 XXSYSABEND DD SYSOUT=X
8 XXCONFIG DD DSN=&SCGPPRFX..SAMPLIB(&CONFIG),DISP=SHR
XX*CONFIG2 DD DSN=&SCGPPRFX..SAMPLIB(&CONFG2),DISP=SHR
IEFC653I SUBSTITUTION JCL - DSN=EMC.SCGP630.SAMPLIB(CGRPCFG0),DISP=SHR
STMT NO. MESSAGE
2 IEFC001I PROCEDURE EMCCGP## WAS EXPANDED USING SYSTEM LIBRARY SYS1.BRUT.PROCLIB
IEF695I START EMCCGP## WITH JOBNAME EMCCGP## IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
IEF236I ALLOC. FOR EMCCGP## EMCCGP##
IGD103I SMS ALLOCATED TO DDNAME STEPLIB
IGD103I SMS ALLOCATED TO DDNAME
IEF237I JES2 ALLOCATED TO SYSABEND
IGD103I SMS ALLOCATED TO DDNAME CONFIG
CGRP000I ConGroup V6.3 (08/28/08-15.05 SCGP630-SC63014 ) Initializing
EMCP001I MODE=SINGLE
EMCP001I MSGLEVEL(5) STOPIEN SZCZEGOLOWOSCI KOMUNIKATOW
EMCP001I USE_RDF_ECA=YES
IEF237I DMY ALLOCATED TO CGRP60
CGRP281I BUILD DATE: 08/28/08-15.05 SCGP630-SC63014
CGRP112I MIH = 15
EMCP001I AUTO_REFRESH=YES YES/NO
EMCP001I DISABLE_AT_SHUTDOWN=NO YES/NO (DEFAULT)
EMCP001I DISABLE_ON_VERIFY_ERROR=NO YES/NO (DEFAULT)
EMCP001I DISPLAY_CONGROUP_LISTOPT=LIST NOLIST/LIST (DEFAULT)
EMCP001I PAGEDEV_ALLOWED=NO YES/NO (DEFAULT)
EMCP001I REMSPLIT_INTERVAL=10 10 SECONDS (DEFAULT)
EMCP001I REMSPLIT_OPTION=NOESTERR
EMCP001I RESUME_INTERVAL=10 10 SECONDS (DEFAULT)
EMCP001I RESUME_OPTION=NOTRNMSG+RSMALLIT
EMCP001I SAF_CLASS=DATASET
EMCP001I SAF_PROFILE=EMC.VALIDATE.ACCESS
EMCP001I SEMISYNC_ALLOWED=NO YES/NO (DEFAULT)
EMCP001I VERIFY_INTERVAL=300 300 SECONDS (DEFAULT)
EMCP001I SRDF_CONGROUP=TEST 8 CHAR NAME WITH ONLY SRDF AND STD DEVICES
EMCP001I DEVICE_LIST=B02E-B02F ALL/9999/XXXXXX
EMCP001I SUSPEND_FAILURE=FAIL RETRY/WTOR/FAIL (DEFAULT)
CGRP104I EOS EXITS ARE INSTALLED
CGRP050I SUBTASK FOR CONGROUP TEST IS ACTIVE
CGRP639I (02) Group TEST Starting polling threads
CGRP639I (03) Group TEST Pollers Started
CGRP635I GROUP TEST Setting poll rate to 15
CGRP639I (04) Group TEST Pollers Initialized
CGRP998I 2 polls outstanding. Delaying polls for 000290102206.
CGRP635I GROUP TEST Setting poll rate to 1
CGRP640I (03) Group TEST Group RECA Clear/Set Started
CGRP634I (05) Group TEST All_Mirrors_Ready = TRUE
CGRP634I (07) Group TEST All_Mirrors_NR = FALSE
CGRP634I (01) Group TEST Zero_Invalid_Tracks = TRUE
CGRP634I (03) Group TEST All_Mirrors_Synched = TRUE
CGRP634I (15) Group TEST has lost some CG protection
CGRP634I (12) Group TEST RDF-ECA defined on no devices
CGRP634I (11) Group TEST RDF-ECA disarmed on all devices
CGRP640I (09) Group TEST Clear Complete. Group RECA Set Started
CGRP634I (13) Group TEST RDF-ECA defined on all devices
CGRP634I (08) Group TEST RDF-ECA armed on all devices
CGRP635I GROUP TEST Setting poll rate to 15
CGRP640I (06) Group TEST Group RECA Set Complete
CGRP148I CONGROUP TEST IS ENABLED FOR CTLR=000290102206
CGRP149I CONGROUP TEST SUCCESSFULLY ENABLED
CGRP143I ENABLE ALL CONGROUP PROCESSING COMPLETED
CGRP611I Initialization Complete
Any idea ?
Marcin
smbl
48 Posts
0
January 7th, 2010 11:00
Additional information:
With two running separate SCF’s (5.7 and 7.0), when I start ConGroup 6.3 and then I try start ConGroup 7.0 I receive message:
CGRP100E another copy of ConGroup is running on this LPAR.
ConGroup initialization terminated.
It means that communication with SCF is active.
In other hand, when I try to start new version ConGroup but without
//*SCF$ES70 DD DUMMY (commented), I receive message:
CGRP514E ***CONGROUP ENDED. API VERSION IS TOO OLD
In this case ConGroup ver. 7.0 probably is trying to talk with SCF, with is ‘obsolete’ for this release.
I hope, that this information can be helpful.
Marcin
smbl
48 Posts
0
January 7th, 2010 11:00
Here you are:
1 J E S 2 J O B L O G -- S Y S T E M R U T 1 -- N O D E N B R U T
0
16.11.18 STC03131 ---- THURSDAY, 07 JAN 2010 ----
16.11.18 STC03131 IEF695I START EMCSCF WITH JOBNAME EMCSCF IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
16.11.18 STC03131 $HASP373 EMCSCF STARTED
16.11.18 STC03131 IEF403I EMCSCF - STARTED - TIME=16.11.18
16.11.18 STC03131 SCF0000I EMC ResourcePak Base VERSION 700 STARTUP
16.11.18 STC03131 SCF0001I EMC SCF ADDRESS SPACE VECTOR TABLE AT 0C104800
16.11.18 STC03131 SCF0301I ***************************************************
16.11.18 STC03131 SCF0301I SCF.INI.CPFX=@@
16.11.18 STC03131 SCF0301I SCF.LOG.RETAIN.COUNT=10
16.11.18 STC03131 SCF0301I SCF.LOG.RETAIN.DAYS=10
16.11.18 STC03131 SCF0301I *SCF.LOG.STORCLAS=STORCLAS
16.11.18 STC03131 SCF0301I *SCF.LOG.DATACLAS=DATACLAS
16.11.18 STC03131 SCF0301I *SCF.LOG.MGMTCLAS=MGMTCLAS
16.11.18 STC03131 SCF0301I *SCF.LOG.TRACKS.PRI=10 /* SRSK default */
16.11.18 STC03131 SCF0301I *SCF.LOG.TRACKS.SEC=50 /* SRSK default */
16.11.18 STC03131 SCF0301I *SCF.TRACE.MEGS=1 /* SRSK default, pri i sec */
16.11.18 STC03131 SCF0301I SCF.TRACE.RETAIN.COUNT=10
16.11.18 STC03131 SCF0301I SCF.TRACE.RETAIN.DAYS=10
16.11.18 STC03131 SCF0301I *SCF.TRACE.DATACLAS=DATACLAS
16.11.18 STC03131 SCF0301I *SCF.TRACE.MGMTCLAS=MGMTCLAS
16.11.18 STC03131 SCF0301I *SCF.TRACE.STORCLAS=STORCLAS
16.11.18 STC03131 SCF0301I SCF.WORK.HLQ=BRUT.ARCHEMC
16.11.18 STC03131 SCF0301I SCF.WORK.UNIT=3390
16.11.18 STC03131 SCF0301I *SCF.WORK.VOLSER=VOLSER
16.11.18 STC03131 SCF0301I *SCF.DEV.EXCLUDE.LIST=CUU1-CUU2
16.11.18 STC03131 SCF0301I *SCF.DEV.INCLUDE.LIST=CUU3-CUU4
16.11.18 STC03131 SCF0301I * *** L I C SECTION *****************************
16.11.18 STC03131 SCF0301I * *** END L I C SECTION *************************
16.11.18 STC03131 SCF0301I * **************************************************
16.11.18 STC03131 SCF0301I * SCF.GATEKEEPER.LIST=B100
16.11.18 STC03131 SCF0301I * SCF.GATEKEEPER.LIST=B000
16.11.18 STC03131 SCF0301I SCF.GATEKEEPER.LIST=B047
16.11.18 STC03131 SCF0301I SCF.MSC.ENABLE=NO
16.11.18 STC03131 SCF0301I SCF.ASY.MONITOR=DIS
16.11.18 STC03131 SCF0301I ******* CROSS SYSTEM COMMUNICATIONS ********
16.11.18 STC03131 SCF0301I *SCF.CSC.ACTIVE=YES
16.11.18 STC03131 SCF0301I *SCF.CSC.GATEKEEPER.LIST=CUU5
16.11.18 STC03131 SCF0301I *SCF.CSC.GATEKEEPER.01175.LIST=00AC
16.11.18 STC03131 SCF0301I *SCF.CSC.ACTIVEPOLL=10
16.11.18 STC03131 SCF0301I *SCF.CSC.IDLEPOLL=5
16.11.18 STC03131 SCF2012I WAITING FOR SRB TO COMPLETE CLEANUP
16.11.18 STC03131 SCF0011I SUBSYSTEM INTERFACE ACTIVATED
16.11.18 STC03131 SCF0580I LFC ******** (CONSISTENT SPLIT) FEATURE ENABLED.
16.11.18 STC03131 SCF0580I LFC ******** (SNAP TARGET) FEATURE ENABLED.
16.11.18 STC03131 SCF0580I LFC ******** (SRDF HOST COMPONENT AND CONSISTENCY GROUP) FEATURE ENABLED.
16.11.18 STC03131 SCF0580I LFC ******** (SRDF/A MSC) FEATURE ENABLED.
16.11.18 STC03131 SCF2023I SCFGBLSN MODULE FOUND, LFC WAS SPECIFIED, SNAP V7.0 ACTIVE
16.11.18 STC03131 SCF0002I EMC $SASECSA TABLE AT 0A32EC58
16.11.18 STC03131 SCF1210I ASY - ESFASY STARTED
16.11.18 STC03131 SCF1310I MSC - SCFMSC STARTED
16.11.18 STC03131 SCF0100I EMC SYMMETRIX CONTROL FACILITY VERSION 700 NOW ACTIVE (74)
16.11.19 STC03131 SCF1315I MSC MODULE= EHCMSCMA VER= V7.0.0 PATCH= SR70083
16.11.19 STC03131 SCF1315I MSC MODULE= EHCMSCMB VER= V7.0.0 PATCH= BASECOD
16.11.19 STC03131 SCF1315I MSC MODULE= EHCMSCMC VER= V7.0.0 PATCH= SR70091
16.11.19 STC03131 SCF1315I MSC MODULE= EHCMSCMD VER= V7.0.0 PATCH= SR70091
16.11.19 STC03131 SCF1315I MSC MODULE= EHCMSCM8 VER= V7.0.0 PATCH= SR70035
16.11.23 STC03131 SCF0403I CONTROLLER 0002901-02206 DISCOVERED
16.11.33 STC03131 SCF0403I CONTROLLER 0002901-02203 DISCOVERED
16.11.41 STC03131 SCF0401I DEVICE LIST HAS BEEN PROCESSED
16.11.41 STC03131 SCF0341I DEV DIS SUM
16.11.41 STC03131 SCF0421I CNTRL NAME=
deleted information about our DASD boxes...
16.11.41 STC03131 SCF0356I DEVICE DISPLAY SUMMARY COMMAND COMPLETED.
16.11.41 STC03131 SCF0341I DEV DIS TOPO
16.11.41 STC03131 SCF0358I LCL SERIAL# MC CCUU MHOP ------ REMOTE
16.11.41 STC03131 SCF0358I 000290102203 5772.103 C000 00FF 000290102206 5772.103
16.11.41 STC03131 SCF0358I --------------------------------
16.11.41 STC03131 SCF0358I 000290102206 5772.103 B047 00FF 000290102203 5772.103
16.11.41 STC03131 SCF0358I --------------------------------
16.11.41 STC03131 SCF0356I DEVICE DISPLAY TOPOLOGY COMMAND COMPLETED.
16.11.41 STC03131 SCF0341I DEV DIS REMOTE
16.11.41 STC03131 SCF0358I RMT SERIAL# MC CCUU UCB@ MHOP ------
16.11.41 STC03131 SCF0356I DEVICE DISPLAY REMOTE COMMAND COMPLETED.
16.11.41 STC03131 SCF0420I Device discovery is complete.
16.11.41 STC03131 SCF1200I ASY MONITOR TASK STARTED
16.11.41 STC03131 SCF1221I ASY MONITOR TASK DISABLED
16.11.41 STC03131 SCF1300I MSC - TASK STARTED
16.11.41 STC03131 SCF1321I MSC - TASK DISABLED
16.11.41 STC03131 SCF1100I SDV MONITOR SNAPPOOL TASK STARTED - SCFMNLOG-06/24/09-14.27-V7.0.0(005)
16.11.41 STC03131 SCF1100I DSE MONITOR DSEPOOL TASK STARTED - ESFMNDSE-03/31/09-16.13-V7.0.0(000)
1 //EMCSCF JOB MSGLEVEL=1 STC03131
2 //STARTING EXEC EMCSCF
3 XXEMCSCF PROC MBR=SCFINI
XX******************************************************
XX* SCF - WERSJA MAINFRAME ENABLER 7.0
XX******************************************************
4 XXEMCSCF EXEC PGM=SCFMAIN,TIME=1440,REGION=0M
5 XXSTEPLIB DD DISP=SHR,DSN=EMC.MFE700.LINKLIB
6 XXSYSABEND DD SYSOUT=*
7 XXSCF$ES70 DD DUMMY <- NAZWA DYNAMICZNEGO SSID DLA SCF-A
8 XXSYSPRINT DD SYSOUT=*
9 XXSCFINI DD DISP=SHR,DSN=EMC.MFE700.PARMLIB(&MBR)
IEFC653I SUBSTITUTION JCL - DISP=SHR,DSN=EMC.MFE700.PARMLIB(SCFINI)
STMT NO. MESSAGE
2 IEFC001I PROCEDURE EMCSCF WAS EXPANDED USING SYSTEM LIBRARY SYS1.BRUT.PROCLIB
IEF695I START EMCSCF WITH JOBNAME EMCSCF IS ASSIGNED TO USER XEMCUSR , GROUP USRSSN
IEF236I ALLOC. FOR EMCSCF EMCSCF
IGD103I SMS ALLOCATED TO DDNAME STEPLIB
IEF237I JES2 ALLOCATED TO SYSABEND
IEF237I DMY ALLOCATED TO SCF$ES70
IEF237I JES2 ALLOCATED TO SYSPRINT
IGD103I SMS ALLOCATED TO DDNAME SCFINI
SCF0001I EMC SCF ADDRESS SPACE VECTOR TABLE AT 0C104800
IGD104I EMC.MFE700.PARMLIB RETAINED, DDNAME=SCFINI
IGD103I SMS ALLOCATED TO DDNAME SCFINI
IGD104I EMC.MFE700.PARMLIB RETAINED, DDNAME=SCFINI
IEF285I #HCD.PARMLIB KEPT
IEF285I VOL SER NOS= IODFSH.
IEF285I SYS1.BRUT.PARMLIB KEPT
IEF285I VOL SER NOS= Z9TCT1.
IEF285I SYS1.PARMLIB KEPT
IEF285I VOL SER NOS= Z9TCT1.
SCF2012I WAITING FOR SRB TO COMPLETE CLEANUP
SCF0002I EMC $SASECSA TABLE AT 0A32EC58
IGD101I SMS ALLOCATED TO DDNAME (SCFTRACE)
DSN (BRUT.ARCHEMC.TRACE.BRUT$$$$.D2010007.T161110)
STORCLAS (STANDARD) MGMTCLAS (MCARCH) DATACLAS ( )
VOL SER NOS= TUTL00
IGD104I BRUT.ARCHEMC.TRACE.BRUT$$$$.D2010007.T161110 RETAINED, DDNAME=SCFTRACE
IGD103I SMS ALLOCATED TO DDNAME SCFTRACE
IGD103I SMS ALLOCATED TO DDNAME SYS00004
IGD104I BRUT.ARCHEMC.LOG.BRUT$$$$.D2009364.T084450 RETAINED, DDNAME=SYS00004
IGD101I SMS ALLOCATED TO DDNAME (SCFLOG )
DSN (BRUT.ARCHEMC.LOG.BRUT$$$$.D2010007.T161110 )
STORCLAS (STANDARD) MGMTCLAS (MCARCH) DATACLAS ( )
VOL SER NOS= TUTL00
IGD104I BRUT.ARCHEMC.LOG.BRUT$$$$.D2010007.T161110 RETAINED, DDNAME=SCFLOG
IGD103I SMS ALLOCATED TO DDNAME SCFLOG
Regards
Marcin
Davidy8s
154 Posts
0
January 7th, 2010 11:00
Hello Marcin,
Do you have SCF output you can post up?
Thanks,
Dave Yates
EMC TSE3
Benevolent Host Systems Moderator
"Il Moderatore Benevolo"
Davidy8s
154 Posts
0
January 7th, 2010 12:00
Marcin,
Something is definitely amiss. I don't see any obvious or glaring omission though. I have a couple general suggestions first.
My first thoughts when I saw the original posting were - config file, //SCF$.... missing, different (between tasks) or LFC. With what I'm seeing, I don't have a quick answer. I ran across one remotely related kb entry, not quite what you have- http://csgateway.emc.com/primus.asp?id=emc58591
Have you tried cleanly shutting down the old CG, etc , & restarting v7 SCF, CG, ETC?
If that isn't helpful and you're still not seeing anything obvious...
Let's do this. We need a service request; You can either email me with a previous service request number ( I can then copy all the relevant info ) or you can open one yourself, which ever is easiest. Regardless of which method you choose, we are going to want the
FULL OUTPUT of all the Mainframe Enablers started tasks, from your testing. We'll then take a look and see what we can figure out.
Also, please give us a brief but complete description of your testing procedure - what you did and in what order.
Edit to add: http://csgateway.emc.com/primus.asp?id=emc803273
;-)
Thanks,
Dave Yates
EMC TSE3
Benevolent Host Systems Moderator
"Il Moderatore Benevolo"
Davidy8s
154 Posts
0
January 7th, 2010 12:00
Marcin,
Thanks for the extra info, that is helpful!
Dave Yates
EMC TSE3
Benevolent Host Systems Moderator
"Il Moderatore Benevolo"
* https://community.emc.com/community/support/host_systems?view=tags&tags=mainframe
EMC Mainframe Support web pages
* https://support.emc.com/products/MainframeSoftware.aspx
USA: 800-782-4362 (SVC-4EMC)
Worldwide: 1-508-497-7901
smbl
48 Posts
0
January 8th, 2010 05:00
Dave,
As you suggest, I’ve sent request to EMC support.
Thanks for your involvement
Marcin
Davidy8s
154 Posts
0
January 8th, 2010 06:00
Marcin,
What's the SR number? We can update the discussion w/ findings.
Dave Yates
EMC²
PREM, Technical Support Engineer 3
Benevolent Host Systems Moderator
"Il Moderatore Benevolo"
Get online support from:
EMC Mainframe Support Forum!
* https://community.emc.com/community/support/host_systems?view=tags&tags=mainframe
EMC Mainframe Support web pages
* https://support.emc.com/products/MainframeSoftware.aspx
USA: 800-782-4362 (SVC-4EMC)
Worldwide: 1-508-497-7901
smbl
48 Posts
0
January 8th, 2010 06:00
It's SR- 32893326
I hope that this request is prepared well. I’ve attached all STC sysout’s and other useful information.
Have a nice weekend
Marcin
smbl
48 Posts
0
January 13th, 2010 06:00
EMC service has found a problem. When we start ConGroup 7.0 with parameter MODE=SINGLE, it is necessary to activate CSC in SCF.
The Default parameter SCF.CSC.ACTIVE is set to NO and in documentation there is no statement about activating CSC when ConGroup is running in single mode.
In the nearest future EMC promised to make some comment in ‘Primus’ about this specific problem.
Marcin
Message was edited by: The Benevolent Moderator; searchability changes, highlighted relevant terms.
Davidy8s
154 Posts
0
January 13th, 2010 07:00
Thanks for the update Marcin. A "primus" is indeed forthcoming. That's EMC speak for a knowledgebase entry. However, the good news is that since you posted it to the forum, other users will now find it if they search for it JUST LIKE IT'S ON OUR KNOWLEDGEBASE.
Best regards,
Dave Yates
EMC TSE3
Benevolent Host Systems Moderator
"Il Moderatore Benevolo"