Unsolved
This post is more than 5 years old
155 Posts
0
805
powerpath issue
Dears,
We have recently installed powerpath for AIX 5.3 for the LUNs from DMX3.. but the AIX host by defult takes only the mpio .. thru smitty, we have disabled the mpio and removed the mpio paths and then configured powerpath .. no help . still taking mpio .. I need the multipathing to be handled only by powerpath .. please kindly assist me to sort this issue
cheers
Nollaig1
137 Posts
1
September 14th, 2010 04:00
Hello,
Can you check and see that the array is managed by powerpath? A powermt display options should show.. knowledgebase article emc211547 may be helpful.
Hope this helps,
Nollaig
Nollaig1
137 Posts
0
September 20th, 2010 07:00
Hello,
Just wondering if the last suggestion was of some assistance?
Regards,
Nollaig