This post is more than 5 years old
1 Rookie
•
299 Posts
0
3043
powerpath viewer
This has been posted in the clariion area, but I was advised to repost here as there is seemingly a higher footfall of powerpath awareness here.
So
I am sticking this here as I cannot find the release notes for powerpath viewer to provide feedback.
Basically I cannot install the management agent on a linux box because the version of powerpath appears to be beyond the version supported, ie
[root@alinuxserver EMC]# rpm -U EMCpower.MgmtComponent.LINUX-5.3.2.00.00-058.RHEL5.x86_64.rpm
error: Failed dependencies:
EMCpower.LINUX < 5.4 is needed by EMCpower.MgmtComponent.LINUX-5.3.2.00.00-058.x86_64
[root@alinuxserver EMC]# rpm -qa | grep E
libICE-1.0.1-2.1
Xaw3d-1.5E-10.1
MAKEDEV-3.23-1.2
EMCpower.LINUX-5.5.0.00.00-275
libICE-1.0.1-2.1
[root@alinuxserver EMC]#
Note the management agent needs powerpath to be less then 5.4 and I am running 5.5
Is there a link to prerequesites in terms of powerpath version ?
Is this a rpm recreation issue or is there something more fundimental in the difference between 5.4 and 5.5 ?
cadencep45
1 Rookie
1 Rookie
•
299 Posts
0
October 21st, 2011 06:00
Thanks,
Found it.
cadencep45
1 Rookie
1 Rookie
•
299 Posts
0
October 21st, 2011 06:00
Alas for the release notes, I get an error message – Access Violation - when trying to view them,ie see atttachment
I see you posted similiar before (https://community.emc.com/message/390420 ) and appreciate the feedback. From a general login to powerlink, under Technical documents, under Powerpath family should it be there or somewhere else, if so can you tell me where to navigate to find this.
Tks.
1 Attachment
image001.png
Brion2
154 Posts
0
October 21st, 2011 06:00
Hi. The version of PowerPath for Linux will determine the required management component code. There are 3 gzip files on Powerlink:
http://powerlink.emc.com/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDownloadsTemplatePg&internalId=0b014066805be195&_irrt=true
All PowerPath Release Notes can be found here:
http://powerlink.emc.com/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b01406680354392&_irrt=true
I hope this helps.
Thanks, Brion
Brion2
154 Posts
1
October 21st, 2011 06:00
Log in to Powerlink
Support > Technical Documentation and Advisories > Software P ~ R Documentation > PowerPath Family
Expand PowerPath
Select Release Notes
SKT2
1.3K Posts
0
October 30th, 2011 16:00
i see you found answer to your own question
So how did you get this working? what Linux version & distribution r u using?
cadencep45
1 Rookie
1 Rookie
•
299 Posts
0
November 10th, 2011 01:00
SKT,
Monitoring on a Windows Box. Monitoring servers running Linux ( Oracle ).