Hi, I am setting up an Isilon 8.2.2 simulated cluster on VMware Workstation Pro 15.5 on Centos 8.
The first node install seemed to go okay although there are warnings about DNS entries missing.
I configured the int-a addresses using the HostOnly network, 172.16.221.100-110 and the ext-a addresses using the bridged network, 10.0.0.100-110.
From the host computer, I can connect to both 172.16.221.100 and 10.0.0.100 to login to the 1st node.
But when I try to install the 2nd node, at the point of joining the cluster, the cluster is seen with status available.. But not joined, the error is Error joining cluster: no response from node: Operation timed out
I assume it is using something similar to DHCP to get IP address information from the 1st node, but I don't know how to figure out why this is failing, I have done this before without seeing this error.
Update, I thought the issue might be tied to the configuration of the vmnet interfaces in VMware Workstation but I have tried different configurations without success.
Right now I have:
vmnet0 : Host-Only -> em0 (int-a)
vmnet1 : Bridged -> em1 (ext-a)
As far as I can tell the networking on the first node is all working fine. I tried doing packet captures in VMware Workstation using vmnet-sniffer and in the Isilon Admin GUI using NetGather. It looks like the 2nd node gets the information about the existence of the first node using LLDP. And when it tries to connect to the first node it sends UDP broadcasts on port 5041 which are received by the first node but no response is sent.
I would double check to make sure that you are installing your cluster as stated in the install guide. https://dell.to/2YOX9Q3
Here is also a link to a KB that could also help. https://dell.to/2YQ4FKH
Please let us know if you have any other questions.
I was able to login to WebUI on Node 1 and add the additional nodes through Cluster Management->Hardware Configuration
The doc is not very detailed about the VM network configuration, I ended up using 2 'custom':
em0 -> /dev/vmnet0 (host-only) for int-a
em1 -> /dev/vmnet1 (bridged) ext-a