Unsolved
39 Posts
0
1204
Ports speed 1G and 10G mixed in the same pool
Hi all!
We have a doubt about a network configuration topic.
Currently islon has different pool network with their different interfaces associated but we have seen that some pools have different speed interfaces associated.
Which it will be the behaviour for a mix of interfaces in the same pool?
We have a 1G interfaces mixed with 10G interfaces.
Would 10G speed be established in a pool with 1G interfaces?
Thanks in advance.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
April 17th, 2020 09:00
Hi,
Which model devices are you using? https://dell.to/2XIYDLF has some information.
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
April 19th, 2020 21:00
It's not best practices. Yes you can mix 1g & 10g in pool, it will get an IP address, but it will have unpredictable results.
https://www.dellemc.com/en-us/collaterals/unauth/white-papers/products/storage/h16857-wp-onefs-best-practices.pdf page 20.
* Do not mix interface types (40Gb / 10Gb / 1Gb) in the same SmartConnect Pool
InfraMED
39 Posts
0
April 20th, 2020 05:00
Ok. Many thanks @DELL-Josh Cr and @PhilLam
I'll keep it in mind.
It exist some kind of impact when delete these interfaces from pool?
Thanks and best regards.
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
April 23rd, 2020 19:00
yes, remove other type.