Unsolved
14 Posts
0
1479
SyncIQ Job Failed with No node on source cluster was able to connect to target cluster
For Your Reference
Note : Disbaled encryption in both cluster and I'm using trial licencse
When i try to start job, I'm getting above error. can you tell what am i missing or is there Some configuration needs to done before run the job?
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
July 20th, 2022 15:00
Hello Dhivakar04,
Here are a couple of links to some kb’s that maybe of assistance.
https://dell.to/3aTdvQx
https://dell.to/3zk1pJx
Dhivakar04
14 Posts
0
July 20th, 2022 17:00
@DELL-Sam L I already tried first link. It wont work and I don't have permission to access second link i gues
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
July 25th, 2022 15:00
@Dhivakar04 ,
make sure isi_migrate service is enabled.
isi services -a
Dhivakar04
14 Posts
0
July 25th, 2022 19:00
Verified that the isi_migrate service is already enabled in both cluster
DELL-Sam L
Moderator
Moderator
•
6.9K Posts
0
July 26th, 2022 00:00
Hello Dhivakar04,
Which Isilon system do you have and what is your current OneFS version?
Dhivakar04
14 Posts
0
July 26th, 2022 03:00
I'm using isilon simulator and oneFS version is 9.1 and 9.4.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
July 26th, 2022 07:00
Try this command and running it again.
Dhivakar04
14 Posts
0
July 27th, 2022 06:00
I ran this command "isi sync settings modify --encryption-required=false" in both cluster Still im facing the same issue.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
July 27th, 2022 08:00
Try this, but you may need to call phone support so they can check the logs.
Modify all policies to use a specific source network pool. Also set force interface and restrict target network options on the policy.
For example:
# isi sync policies modify --source-subnet --source-pool --force-interface yes --restrict-target-network yes
Dhivakar04
14 Posts
0
July 29th, 2022 03:00
Hi
I tried set subnet ,pool and start the job stll fails and I check the log(var\log\isi_migrate.og) it's shows "Error from remote sworker 192.xxx.x.xx: Unable to find the subnet with IP". Will try again.
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
July 29th, 2022 06:00
What does it output? isi network groupnets list --sort=id --descending
Also did you set the subnet on the groupnet. Page 432 https://dell.to/3PYZsrw
Dhivakar04
14 Posts
0
July 30th, 2022 21:00
I found subnet with different gateway ip and subnet's pool's is ip is totally different from the ip that i trying to connect, so i tried to add new subnet but im getting "The edit to the subnet did not save due to the following error: Subnet 'int-a-subnet' ip overlaps with ip isilon"
DELL-Josh Cr
Moderator
Moderator
•
8.5K Posts
0
August 1st, 2022 06:00
Try to go through the connectivity guide https://dell.to/3oMO3PW and see if something is incorrect, it sounds like the network segmentation isn’t right and it is overlapping.
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
August 1st, 2022 09:00
@Dhivakar04,
can you ping target IP from source IP?
can you ping source IP from target IP?
Is SBR enabled?
Sounds like the backend and frontend network is192.x.x.x
Dhivakar04
14 Posts
0
August 3rd, 2022 21:00
I don't have access to any of these links. could you please send me any other links that i can access?