This post is more than 5 years old
17 Posts
0
1010
Will the old accelerator nodes support 7.0 and above?
Will the old accelerator nodes support 7.0 and
above or are we forced to replace them with A100s when we upgrade to 7.0.2.X?
This post is more than 5 years old
17 Posts
0
1010
Will the old accelerator nodes support 7.0 and
above or are we forced to replace them with A100s when we upgrade to 7.0.2.X?
Top
BlueSteelGT
17 Posts
0
July 20th, 2013 03:00
Yes, 7.X and up will support the older accelerators and all code up to what ever
code version comes out when it goes EOSL. Not sure what happens with legacy equipment support after that.
The new A100 requires a minimum of 7.0.2, but it is not required that you swap out the older nodes once you upgrade OneFS.
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
September 22nd, 2013 00:00
When will the A100 Backup Accelerator support OneFS 6.5? Can't seem to order the IQ Backup Accelerators no more.
Peter_Sero
1.2K Posts
0
September 22nd, 2013 05:00
No, but get the old ones from ebay.com,...
-- Peter
Phil.Lam
1 Rookie
1 Rookie
•
567 Posts
0
September 22nd, 2013 07:00
Will Sales approve?
Sent from my iPhone
Peter_Sero
1.2K Posts
0
September 22nd, 2013 07:00
IaaC can't give a general statement on this...
BlueSteelGT
17 Posts
0
September 23rd, 2013 13:00
Phil, much like you have to upgrade to 6.5.5 to support X400 and NL400s, you will have to upgrade to the minimum code that supports the A100 - 7.0.2.
I am told that we depleted the stock of older Accels which is why it is no longer an option in DXP.
Lastly, both Sales and CS would not be very fond of the second hand purchase. Haha.