Could someone boot into recovery mode, launch the command prompt and run the following, bcdedit /enum all and post it? I have a friends Dell 1545 and I think the Boot Manager/Loader is screwed up b/c it is not booting into recovery. I can boot to the Windows 7 OS, but we need to do a factory restore because of a nasty virus she has. I would greatly appreciate it!
Solved! Go to Solution.
Welcome to the Community,
Follow the steps given in this link below to restore system to Factory settings :
<ADMIN NOTE: Broken link has been removed from this post by Dell>
If you don't find these options on your system,than you may have to use Windows DVD to manually reinstall Windows.
Thanks for the information, but in my original post, I stated that I could not boot into recovery, therefore, the link you provided me does me no good. Maybe I should have asked my question in a different manner.
In the Dell boot configuration file, there seems to be the following, correct?
1. The Boot Manager which seems to boot from the Recovery Partition
2. A Boot Loader config that boots the Windows 7 OS
3. A Boot Loader config that boots the Windows Preinstallation Environment
4. A Boot Loader config that boots the ramdisk partition
5. Other configs
6. The Device Option config which identifies the \Recovery\WindowsRE\boot.sdi location, etc
I am simply asking someone to post their boot config file setup to ensure this one is setup properly. Since you work for Dell, would you be willing to share the default boot config file setup for a Dell Inspiron 1545?
Also...3 days of trying to figure out this boot config myself and a very extensive web search, I have found another method of restoring the Dell factory image back to the laptop, without having to use the Windows 7 DVD, which is not included and most OEMs do not provide them by default anymore.
Here is how: Your recovery partition must be available. If you deleted your recovery partition, your out of luck
1. Create a bootable winpe with imagex disk using Windows Vista AIK
2. Boot your laptop from the disk
3. Format your OS drive
4. use imagex to apply the Dell factory image located x:\dell\image\factory.wim
Yes, it took me 3 FULL days to find this, but it works! Not sure why OEMs just do not help their customers in situations like this.
PM me for through details to restore your Dell factory image if 1. You can not boot into the default recovery option and 2. Your recovery partition is still available.
Dell uses its own MBR and as you wrote if it is screwed up (maybe overwritten while trying to reinstall windows from DVD or an MBR-virus) you will loose access to the recovery partition.
There is a link to a webpage that shows up a possibility to recover your system - this link was once posted by ejn63-never tried it myself
To reinstall windows on an inspirion 1545 from scratch is pretty easy(I have one) and also has several advantages.Honestly this is the best thing to do - Even if you recover the system successfully you will have to install all windows updates like SP1 etc...
My advice - install from scratch,install all updates,install your friends favourite programs,make a backup using either free Macrium Reflect or Windows-built-in utility and your done with it.That's way better than to restore from an outdated recover partition....
I had already found and attempted to use that link and my guess is imagex is no longer available on the recovery partition because I could not find the application. Also, I manually copied imagex to the recovery partition, ran the command and it still did not work. That is why I created my own WINPE boot disk with imagex included and it worked like a charm.
If the factory image is still available, why install from scratch when I can reimage it with the factory image? Either way, factory image or from scratch, you have to install MS upgrades, patches, all software you installed etc. So your in the same boat either way. The advantage, on the other hand, of using the Dell image, if available, is that you do not have to worry about locating, downloading and installing hardware drivers that may not be included in the standard Windows 7 DVD.
My vote: Dell factory image, if you have it available.
I will post a link to my WINPE bootable disk, with EASY instructions
You seems to be someone who has some in-depth knowledge otherwise you wouldn't have been able to fix this tricky business with Dell's recovery image - well done.
Indeed I do! I have over 10 years in IT, starting my career in desktop support, so it seems I learned a few tricks here and there. Also, the information was extremely difficult to find.
Want to recover your factory image but can't boot into recovery mode? Well here you go!
1. Download and burn this bootable WINPE image with imagex included ( www.dropbox.com/.../winpe_x86.iso )
2. Follow the instructions below, thanks to this link and murthy511 for posting it: en.community.dell.com/.../19331267.aspx
Boot system using the same disk and follow the steps
1. Check C: drive is recovery partition by doing into C: and type dir
2. if it is recovery partition(most probably, it will be),go to D: and check it is OS partition
3. it is recovery partition(most probably, it will be), go to Eyour DVD drive)
4. format D: drive and
imagex /apply c:\dell\image\factory.wim 1 d:
6. wait until reaching 100 % (for me it took 6.32 minutes)
7. type exit
And its really that simple!
Thanks very much! With this guide I managed to restore the factory image to my Inspiron 15R 5520 after an ill-fated attempt to install from a retail cd.
Ill just add some extra info where I had to deviate from the guide a little to get it to work:
1. If you get an error where it cant run the imagex command, make sure you are on the cd you are booting the WINPE image from in command prompt, NOT the X: drive which is a RAM drive. For me I had to run the following command:
imagex.exe /apply c:\dell\image\factory.wim 1 d:
This is because my cd was the F: drive, run through all the drives until you find your cd with imagex.exe on it.
2. When you have successfully imaged the Factory.wim you may get an error on the next bootup, for me it offered no options but a reboot and said contact administrator. To fix this I inserted a retail Windows 7 install disk (this can be obtained from the microsoft digitariver mirror) and chose the "Repair my Computer" option. It scanned for errors and detected a startup error and fixed. I was now in the factory image.
Thanks again and maybe dell could make an emergency disk to streamline this process, lots of people on google seem to have the same problem. (Intact recovery partition but no way of launching into it and restoring the factory image)
It was unbelievable to see the lack of available information online or assistance I received. Just to know one person succeeded from this post makes me happy. But you are very much correct with your recommendation #1. Steps 1 - 3 in the instructions I posted is basically saying, go through your drive letters and determine which one is the OS drive, The last thing you want to do is format the System Recovery partition with your factory image...lol I would be interested in knowing what the error message was that you got and had to fix with the Repair my Computer, just curious.
My last recommendation to anyone with a factory image available would be to give the system recovery partition a drive letter within Windows, navigate to the factory image drive_letter\dell\image\factory.wim and copy it to another source, like an external hard drive or your online storage. Why? Because if you delete the recovery partition or if your hard drive goes bad, your factory image would no longer be available. But as long as you have that image, locally or remotely, you will ALWAYS be able to restore back from it.