Mark1993
1 Nickel

I8kfanGUI unistall

I installed I8kfanGUI because my gpu was running kinda hot. I then put fan settings all the way up so that they were on the highest settings. I played Cod4 and my gpu was sluggish and processing graphics much much slower that usuall. I have Nvidia Gefore Go 7900 GS. So, I thought maybe the I8kfanGUI is messing around with the GPU. So I uninstalled it via Add/Remove programs in control panel. I also went to program data and files and deleted its folder. My GPU works fine now. Is all the fan control givenen back to the BIOS now since the program is gone? I want to make sure so that nothing will overheat from fans not turning on.

 

Also, was this program safe to use? The discalmers said it changes the laptops thermal processing.  

Message Edited by Mark1993 on 03-15-2008 10:12 AM
0 Kudos
5 Replies
dgkpcon
4 Ruthenium

Re: I8kfanGUI unistall

Yes it is safe to use it is a dell utility,but i would go into bios and make sure all the settings were returned to normal.You should have set i8kfan back to the default settings before deleting(not sure,but i would check).

E1705 T7400 2.16Ghz / Vista Home Premium SP2 / 17" LG WUXGA 1920 X 1200 / 4GB 667Mhz Geil Ram w/Heatspreaders / Western Digital Scorpio Black 500GB 7200RPM / 500GB 7200RPM My Book / Nvidia Geforce Go 7900GS 256MB / Toshiba DVD/CD+/-RW DL / Intel 4965 A/B/G/N / 355 Bluetooth 2.0+EDR / Pinnacle Pro HDTV USB Tuner / Pinnacle Ultimate HDTV USB Tuner / Sound Blaster Audigy Advanced MB / Sound Blaster X-Fi Extreme Audio Notebook / Logitech G51 Surround Sound Speakers / 2-NB-MA01 Notebook Coolers / 3D Mark06 5446 / Driver v.174.31 /

XPS M1730 Saphire Blue X9000 @ 3.2 / Vista Home Premium SP2 / 17" WUXGA 1920 x 1200 / Matshita BD\DVD Combo / 8GB 800Mhz Geil RAM / 500GB>200GB 7200RPM / 9800M GTX SLI / AGEIA PhysX Accelerator / Intel 4965 / 355 Bluetooth / 5700 Mobile Broadband / 3D Mark06 16250 /Driver 275.50 beta

XPS Gen 4 Desktop>being rebuilt

0 Kudos
Highlighted
Art
3 Cadmium

Re: I8kfanGUI unistall

Hold down your [Fn] key and press the key to restore your BIOS Fan Control.
0 Kudos
Art
3 Cadmium

Re: I8kfanGUI unistall


@dgkpcon wrote:
Yes it is safe to use it is a dell utility,<...>
This is correct, it is safe to use, however misuse could cause damage.  It is designed for use on Dell Portables, but is not supported by Dell.


Best would be to use the mode of (^) Show temperatures only, no fan control and you can open [Options] to set what and how, for your display.

 

Click here to open Fan Control Main Page, v3.1 supporting multi core systems



Art
0 Kudos
eskymi
3 Cadmium

Re: I8kfanGUI unistall

I was going to post and ask this question also.

 

I had it to montior the temps. Kept it at SHOW TEMPS NO FAN CONTROL and left it at that except for one instance.. I tried using the programs  settings one time, but didnt' like it so switched it back to SHOW TEMPS ONLY.Then I deleted it to try Coretemp to monitor the core temps.

 

So I guess my BIOS settings for fan control should be ok, as I only used the program to control the fans the one time?   After switching back to NO FAN CONTROL, I kept the program and monitored since Dec, but the fans seemed to run properly.  So should I still do the FN Z thing?  How do you check the fan settings under BIOS?

 

Message Edited by eskymi on 03-16-2008 09:38 AM

2  XPS 420's, Quad 2.4ghz, 8800GT and 9800GTX, 3gigs RAM (Vista Home)

2 Inspiron 1720's, 2.0 and 2.5 gig processors, 2 and 4 gigs RAM, 8400GM and 8600GT cards (Vista Home and Ultimate)

1 E1705, 2.0 processor, 2 gigs RAM 7900GS. (Vista Home)

2 Mini 9's, Black and Cherry Red......(Windows XP) Love The Mini!!!!!

 

 

0 Kudos
Art
3 Cadmium

Re: I8kfanGUI unistall

Fn/Z could be done at any time, it won't change any settings, on my D830 it does momentarily shut the fan off and then it returns to a speed appropriate to the temperature.

 

You can observe details with use of these utilities and notice if there has been an unexplained increase in heat.

 

Most important, would be to clean your cooling system at least monthly, as fans will draw in dust that can be captured by the cooling fins of your Thermal Cooling Assembly.

 

Best way to do this will vary by system, D800 will drop main fan with two screws.  View (from Support top right of this page) your Service Manual, to understand how your systems are constructed.

 

D830, you can see the fan and cooling fins through the air intake/exhaust, but access is a job best avoided by frequent cleaning through those vents.

 

Important to prevent high air pressure (like from canned 'air') from overspeeding the fan and damaging fan bearings.

 

Art 

0 Kudos