Unsolved
This post is more than 5 years old
1 Message
0
18323
Inspiron 14 r n4010 RAM issue
I have Dell Inspiron 14 r n4010, win 7 x64 , 3GB RAM (1 GB+ 2 GB) 2 slots .Both RAM company- Hynix 1333 Mhz pc3 - 10600s
I searched internet , my system suport maximum 8 GB RAM.
Yesterday I bought 4 GB RAM , Hynix 4 GB , 1333 Mhz ,pc3 10600u
I take out 1 GB RAM and placed 2 GB RAM in that slot and New 4 GB RAM in 2GB slot.
Now my windows is keep crashing during boot.I also tried to place 4 GB RAM in different slot but it keep crashing
But when I take out 4 GB RAM and place 1 GB in slot 1and 2 GB RAM in slot 2 , my laptop works fine.
Can someone help me with this issue, I really want to upgrade RAM from 3 GB to 6 GB. ?
DELL-Terry B
4 Operator
4 Operator
•
3.5K Posts
0
June 15th, 2015 10:00
I checked over the suggested memory configurations. The way that I am understanding what you are trying is to replace the 1 GB memory module that shipped with the system with a 4GB memory module. Changing from the 3GB of memory that originally shipped with the system to 6GB, is this correct?
This is what I have for possible memory configurations for the 14R
According to the slot you should have the 4GB module in slot A, and the 2GB module in slot B. If that didn't work swap them, try the 2 GB dim in the first slot and the 4GB module in slot B and then test.
If you continue to have problem try the new module on another system and see if the problem follows the module or the notebook.
TB