Inspiron N4010 ram memory specs

Kunam,

Below is the memory information and specs for the Inspiron N4010.

Memory

The Inspiron™ N4010 system supports dual-channel DDR3 SDRAM with memory speeds of 1333 MHz. At 1333 MHz, this memory offers a significant increase of memory performance over previous platforms.

• The memory solution is implemented in a dual-channel configuration, allowing the system to have twice the memory bandwidth while using the same memory technology.
• Memory modules must be installed as a perfectly matched pair to take advantage of the dual-channel memory bus. If not a matched pair, the system's memory bus operates in a single-channel configuration.

Memory Configuration

Inspiron™ N4010 has two user-accessible SODIMM sockets, both slots can be accessed after removing the base cover. Basically, when both DIMM connectors are populated, the system has optimum dual-channel performance unless channels A and B have different amounts of memory.

Thanks Jesse!

Now it is clear that 8gb modules are not supported and that the frequency must be 1333Mhz. But I have  tried 4gb modules with the same frequency (1333mhz) with no success, the specific model was this one (http://goo.gl/pLLzm3). Any idea? Are there any other specifications? Number of pins? Buffer? Cicle time?

I think even 1133mhz also supports. Please check it once. I am using n4010 which had come with 4gb ram ( 2*2 10600S with 1133Mhz)