Just bought an Inspiron 5759 from Dell Canada.
Touchpad is very squirrelly - move around and it randomly perceives a click hence starts moving or invoking stuff. Try to click left or right button (bottom left or right of touchpad) and the cursor moves so I can click on wrong thing easily. Looked for Touchpad settings under Control Panel Mouse. Nothing there specific to touchpad - just generic mouse settings. Looked in Device Manager - Mouse and Pointing Devices - see HIID compliant mouse and PS2 compatible mouse. Driver for either is from Microsoft dated 2006.
Ok - load newest driver from dell.com. Claims it installs ok - wrong. The Dev Mgr shows same Microsoft drivers. Manually force driver to Synaptics - Dell TouchPad. Looks like it succeeds. Now, Dev Mgr shows two mouse devices: Dell Touchpad and PS2 Compatible mouse. Try control panel - Mouse. Now I see a Dell Touchpad tab but the only field - Change Dell Touchpad settings - does nothing.
Spent 6 hours trying to get help from Dell Support - worst experience with any support organisation (other than HP who managed to toast a notebook via remote control while trying to install a printer driver - never did work.) Absolutely no improvement in situation. Four times put on hold and line drops. Considering strongly returning the notebook.
Went to BestBuy and looked at 8 Inspiron and XPS computers on demo. Not a single one has a Dell Touch pad either in Device Manager or as a Tab in Control panel Mouse. In other words, Dell is shipping out notebook without minimal testing. You cannot adjust touchpad settings on any of these computers.
The Dell computers all show multiple devices for the single TouchPad. All other notebooks I tried at BestBuy (Acer, HP, ASUS) show a single vendor specific touchpad driver. Only Dell computers are wrong. Only Dell notebooks are incapable of changing touchpad settings.
I have a Dell Inspiron 3700 from 2010 - still love it but this new Dell purchase experience is likely to force me to go to ASUS or anybody else.
I can never get to anybody on support other than in India or Phillipines and they have no influence to escalate. This issue is pervasive based on all the units I tried at BestBuy and Dell does not give a rat's *** about it.
I used to recommend Dell to friends and family - never again.
With Win 10, touchpad drivers are found in the Win 10 Settings, selected in the Start Menu. In addition, many newer laptops are using a Precision touchpad, a Microsoft inspired pad. The driver is incorporated in Windows itself, and a regular driver will not work. This is why you don't see anything in the "old" Windows Control Panel app or in the Device Manager.
Thank you for replying.
I am aware of that of the mouse settings under Win 10 settings. The principal functions in that screen are to configure the gestures. If you go to the bottom of that screen, you will see "additional mouse options"; if you click on that, it takes you to the Mouse panel of the Control Panel. With a generic driver, that panel will show the following tabs:Buttons, Pointers, Pointer Options, Wheel and Hardware.
With a vendor specific touchpad driver, there would be an additional tab labeled "vendorXXX touchpad" - in the case of the Dell/Synaptics driver, you see either "Dell Touchpad" or "Touchpad". That panel shows one field labeled "Click to change DellTouchpad settings". That is the panel that will not open up. That panel would include mechanical tuning for the touchpad - e.g. light touch vs heavy touch whether for a click/tap or just for motion control. Currently the default setting I seem to have is heavy touch for motion and light touch for tap/click which is very hazardous. There are no equivalent tuning settings in the Win 10 settings. The DellTouchpad might also contain some gesture controls that overlap with Win10 settings - I don't know since I have never seen it open under windows 10.
Under windows 7, on my Dell Vostro 3700 there are many sub-panels - I have attached a clip of one those to illustrate the types of settings available - there are others.
If you indeed have a Precision touchpad, you will see NOTHING in the Control Panel, as I said before. Microsoft controls the pad driver. These pads have a large number of features which, however, Microsoft DID NOT incorporate all of them in their driver initially. Plan was to add more features with each major Win 10 update. The December update contained some, and so should subsequent updates. Many have tried to use conventional drivers, but with little success.
Thanks for replying Kirk - it's people like you that makes sites like this useful.
You indeed seem to be correct. I went back to BestBuy and tried a bunch of notebooks - Lenovo, Acer, HP, and ASUS. Only the Dells and a few Lenovo's had precision touch pads and in all cases there was no vendor specific tab in the Control Panel/Mouse.
What you are saying about Microsoft taking over the touchpad is very disappointing. Microsoft has a rotten history when it comes to dealing with hardware and this is a case in point in that they make it impossible to tune the hardware and they also preclude somebody configuring single finger scrolling (i.e. scroll areas on the right and bottom of a touchpad). They also stifle innovation if a touchpad designer comes us with a clever idea. (It is ironic that Microsoft call the feature Precision Touchpad when they have removed the tuning to truly help make it more precise.)
It is still misleading/stupid for Dell to have a recommended driver for all their notebooks when they neither load it themselves when they ship a computer and it does nothing when you install it. Furthermore, for the Dell system analysis to tell you to install the driver is equally stupid.
I am not sure I am going to keep this notebook. Dell is letting me down in multiple ways (I have a problem with my vostro 3700 as well) and I am close to giving up on them as a company.
I am now going to see if there is a way to get Windows 10 to not see the Dell touchpad as a precision touchpad in case that liberates the Dell/Synaptics driver and allows the full configuration to be accessible.
By the way, FYI for anybody else with the same objections, I tried loading the Synaptics drivers directly - no luck. Apparently, as per the Synaptics site, Dell has customised things so the standard driver do not work.
Thanks again Kirk.
This is one of the worst touchpads I have used. Too sensitive. That the buttons are part of the surface is just stupid. Nearly every I use the buttons the mouse point moves. Dumb. No momentum....
And to learn that Dell has allowed MS to again make something good into something *** is way disappointing.
It is worthless. No way to adjust any of the really important settings.
So, it is now disabled and I have attached a NON MS mouse.
Everyday MS and windows 10 does something not good for users.
And, Dell is no longer the go-to vendor for my clients. I have recommended Dell since the beginning, over 100 computers have been purchased by my clients from Dell. We have endure bad keyboards, and mice,... But this is beyond tolerable.
I am going to be way more discerning now.
And: still after 20 years attempting to update any dell drivers,... I get items listed that are not appropriate to the service tag on the computer. Just like this one.
And get a better NOT ROBOT thing. Too much trouble.
Agreed on all points. They have basically disabled the touchpad by not allowing the Synaptics drivers to control it. And, as jm666 stated, the design is completely stupid with the buttons built into the touchpad surface. That button area should be completely dead to touch input but no, almost every time you try to click a button the *** mouse pointer will move, often completely off the button you are trying to click. It's absolutely garbage and I will buy an aftermarket touchpad as soon as someone builds one for this notebook. I HATE THIS TOUCHPAD!
Just to clarify. Dell doesn''t disallow installing a non-Precision driver, Microsoft does. Win 8 an 10 both lock out any pad drivers if a Precision pad is present. It is somewhat strange that just about every review of Dell laptops with a Precision pad thinks the pad performance is good. I wonder how detailed they get with pad evaluation.