I have an E1505 with the Intel 945GM chipset ungraded to the latest version on the Dell site. However, I have software which requires Shader 2 technology. Intel site upgrade isn't compatible with the Dell, so I'm at a loss. My laptop keeps getting the BSOD on igxpdx32.dll which is a file for DirectDraw, but there is nothing on this file either. Also performed a Directx update to no avail. Any suggestions? Thanks!
Thanks, but once again I get this:
The driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer's manufacturer. Setup will exit.
I am hesitant to uninstall the current driver because of this. And I have the most current Dell driver installed. Sooo...
Can I somehow convince Dell to address this issue?
Trust me...uninstall the current driver from the Add/remove programs list and restart. Download the intel driver first and save the exe file on your Desktop....after reboot just open the intel driver and it will install.
If it still doesn't work (worked for me) just download the dell driver and reinstall it.
Sorry, but the answer is twice No.
This card does not support vertex shader 2, only pixel shader 2...and you cannot upgrade the card unless you change the motherboard, but that's not worth it in my opinion.
macubi, try downloading the R179525.EXE file here.
This has Intel 945GM video drivers v184.108.40.2069. I've used them and they worked on the E1405 laptop. They should also be compatible with your E1505 machine. Un-install those generic intel 945 drivers, reboot and then use the R179525.exe file to extract the Dell-specific Intel 945 drivers, run its setup program and restart your machine to see if they work correctly.
The generic Intel 945 drivers from the Intel site don't work. They never worked nor installed on the E1405 notebook computer that I'm using. So the "customized" Intel 945 drivers from Dell are needed and not the generic ones from Intel.
erpster05 make note that the R179525.EXE driver update is for Vista users not XP. During installation the driver requires the dwmapi.dll which is a Vista dll file and not required for XP/2k users. But your solution works for Vista (at lest for me anyways).
I have virtually the same issue...
Inspiron 9400 notebook. I can't run Pixelbender Add-in in PhotoShop CS5. I was told by Adobe support that I needed to have the following supported on my graphics chipset, on my Dell notebook:
I have downloaded the latest Dell drivers for the 9400, but they fall short of the requirements for PS CS5. I am only playing at OpenGL 1.4.
I tried installing Intel's drivers for Vista, and got the same message about the hardware not being correct. I will use the information found here, and remove the Dell video drivers completely and reboot, then attempt to install the Intel ones. Do you know if the ones for this machine, from Intel, support PS CS5's requirements, noted above?
I am downloading this file from Intel's site: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=16312&lang=eng