Unsolved
This post is more than 5 years old
5 Posts
1
97267
Latitude E5500 COM1 Port and Windows 7
Recently I moved my OS to Windows 7 for a Latitude E5500. However my COM1 Port is not available anymore.
I applied all Dell system updates but the COM1 Port is still out.
I noticed that IRQ and Addresses normally setup for COM is allocated by other system devices and there is no IRQ\Addresses available for it.
Could someone help? I already contact DELL Support but no solution was found for this issue.
Regards,
Mauricio Bertucci
ScottyU
5 Posts
0
March 26th, 2012 13:00
Did you ever get a solution for this? I am having the same problem.
ScottyU
5 Posts
1
April 25th, 2012 07:00
I found another thread and was able to fix the problem by rolling my BIOS back, I had recently updated it and when I rolled it back, the port worked fine.
m_bertucci
5 Posts
0
April 25th, 2012 07:00
No. I suppose DELL is not interest in this case. They sent me the information to downgrade W7 to WXP to get serial on again.
ScottyU
5 Posts
1
April 25th, 2012 08:00
en.community.dell.com/.../19989100.aspx
m_bertucci
5 Posts
0
April 25th, 2012 08:00
Could you help me find thread about this issue? I will try it on my Latitude E5500.
speedstep
8 Wizard
8 Wizard
•
47K Posts
1
April 25th, 2012 09:00
Roll back the bios to A16.
m_bertucci
5 Posts
1
April 26th, 2012 04:00
I suppose DELL enginners will find out the problem in BIOS A17 and release a A18 concerning COM problem. I looking forward for this.
m_bertucci
5 Posts
1
April 26th, 2012 04:00
Thanks a lot. This really solved my issue. The COM port is working fine.