Latitude E6320 Hard Drive Screws

I too am looking for an answer to this, I know I'm a bit late to the party, but I can only wager they are M3x5mm screws, as the standard M3x3mm is much too small!

Does anyone know the exact size for these screws, i'm in the same boat need the screws for the hard drive, the ones i purchased are to small they drop straight into the slot.

I would guess M3 x 5mm too.

See if the service manual says. They sometimes do.

Screws usually come with the hard drive caddies that they sell on eBay.

They are M3x5mm screws, I confirmed this myself just the other day. The rest of the bottom screws appear to be M2x5mm, as the standard 2.5mm seem to be too big, measuring the diameter of the hole confirms this as it is smaller than 2.5mm.

I bought m3x4mm and were far to small, thread wise and dropped straight into an ssd I bought, has anyone actually purchased and used the screws and worked, if so any chance of a link so there is no guessing... Cheers.