This post is more than 5 years old
11 Posts
0
50468
Resolution issues on WD15 Dock with three monitors
I have a Precision 5510 Laptop with Windows 10 and a WD15 dock (type-C). All drivers/BIOS/dock firmware were updated as of 4/12/17.
Intel Graphics 530 driver version: 21.20.16.4590
I have 3 Dell monitors connected as follows:
Monitor 1 (Dell 2314H) connected via DVI to dock mini-display adapter (1920 x 1080)
Monitor 2 (Dell 2314H)connected via DVI to the HDMI adapter (1920 x 1080)
Monitor 3 via VGA cable to the dock (640 x 480)
For monitor 3, I have tried 2 different models -
Dell S2330MX- - capable of 1920 x 1080 at 60Hz
Dell S2340M - capable of 1920 x 1080 at 60Hz
Monitor 1 is the primary and the desktop is extended to use all 3 while the 5510 is closed, I cannot get the resolution on monitor 3 to go any higher than the 640 x 480.
Documentation Provided by Dell-Robert p over at http://en.community.dell.com/support-forums/laptop/f/3519/t/20004811
suggests that I should be able to get 3x 1280x 1024
Any help would be appreciated!!
rboerner
1 Rookie
1 Rookie
•
28 Posts
0
April 13th, 2017 16:00
Looking at the resolution support table here -> www.dell.com/.../dell-dock-wd15--usb-type-c---information--capability-and-specifications it may be that you are running into a hardware limitation.
Although a long shot, I'm assuming you are using a 'passive' mini-DisplayPort to DVI converter to connect monitor #1. If you connect monitor #1 with a mini-DisplayPort to DisplayPort cable (the specs indicate it has a DP port -> www.dell.com/.../pd) to rule out the passive conversion as a limiting factor, does that help?
Redbird11
11 Posts
0
April 14th, 2017 07:00
rboerner - I appears that I am running into a max resolution issue over the type C. Its unfortunate. I like the higher res that the 5510 has to offer, but losing a 3rd monitor hurts. Thanks for your help