Laptops General - Read Only

Last reply by 09-20-2017 Unsolved
Start a Discussion
Not applicable
6675

Update bios for xps 13 9360

And after all this - the notebook is brick.

Didn't start at all.

XPS_9360_1.0.7.exe

What can i do myself? Or i need go for service engenier?

thanks a lot

Replies (12)
6 Indium
3785

:emotion-2:

Please follow the steps below to see if there's a BIOS recovery on the system:

7 Plutonium
3785

Ugh, this is a mess.  First Dell introduces BIOS updates for multiple systems that causes serious USB device dropout issues with peripherals attached to a TB16/WD15 dock, then on the XPS 13 9360 they release a 1.0.7 BIOS version AFTER having released a 2.1.0 BIOS version, and now it turns out the 1.0.7 BIOS is bricking people's systems.  This isn't the only report of that.  Come on....


2 Bronze
2 Bronze
3885

Also happened to me today.  The recovery procedure above does not work.

If I find a solution I will post back.

2 Bronze
2 Bronze
3885

Bricked my XPS 13 in the same manner with same idea, loosing the USB Keyboard after some minutes attached to a TB16.

BIOS Recovery Procedure from above doesn't worked for me too.

Meanwhile I've created a Service Request and Dell will change the Mainboard.

Using Arch Linux on ZFS root partition postponed. ;-)

PS: Sure, to go from BIOS ver. 2.1.0 -> 1.0.7 is somewhat stupid, but "hope dies last" and it was the brand new one from 22 Aug (2.1.0 from 03 Aug). Don't search for ver. 1.0.7, Dell has deleted from 9360 Support Page.

3 Zinc
3885

Tried this at boot?

> Start the ePSA Pre-boot System Assessment by pressing <Fn> and the power button.

2 Bronze
2 Bronze
3885

Yes, at first: doesn't worked...

3 Silver
3885

This Reddit thread is relevant:

www.reddit.com/.../

2 Bronze
2 Bronze
3885

Mainboard replaced and will stay on default BIOS ver. 1.3.5 for now, because no TB16 USB/Keyboard issues.

7 Plutonium
3885

BIOS update 2.2.1 for the XPS 13 9360 was released today, which according to Dell-JustinC in another post is supposed to fix the USB intermittent disconnect issue with the TB16.


Latest Solutions
Top Contributor