I've installed windows 8 on my Dell Inspiron 1501. Windows isn't recognizing my ati radeon xpress 1150 video card.
I tried to follow this guide to installing Catalyst 10.2 http://answers.microsoft.com/en-us/windows/forum/windows_cp-hardware/ati-radeon-xpress-1150-video-driver-for-windows-8/8a16818a-0550-401e-8b2c-a2e0ffade10f
It said to go to directory: C:\ATI\SUPPORT\10-02_legacy_vista32-64_dd_ccc\Packages\Drivers\Display manually to install the driver. When I go there manually it doesn't seem to have the "packages" folder. I've tried running all the other applications, including those in display by just going to the folder, but it keeps saying that it isn't supported.
This is above my intellect, but I know some smart computer person out there knows what to do. Please help me! My thanks in advance.
DELL has not tested Windows 8 for INSPIRON 1501 system and hence Windows 8 drivers are not available for this model. However I would recommend you to try downloading vista drivers to see if it works.
Below is the link to download vista drivers.
Please do get back to us for any assistance.
Thanks and Regards,
Hi. Thanks for responding to my question.
I downloaded the driver and it wouldn't install. I then looked online and found that there is a way to run a driver in compatibility mode. I did this and it still failed to install. It states that all packages installed correctly except ATI HDMI Audio Driver.
Does anyone else know a way to make this work?
Thanks for your help.
How did you get Windows 8 to install on your 1501? I have Win8 Pro x64 retail and I cannot get past the initial start screen, the Windows Icon shows on the screen and the little dots go in a circle and never stop. I also cannot get it to load a Windows 8 To Go thumb drive, again it only gives the initial start up screen with the dots and goes no further.
i installed windows 8 without any problems at all. the only thing i need to work out now is adjusting the screen resolution. i used a disk to install.
Under device manager see if the ATI driver is listed, if it is listed then the drivers seems to be installed so change the screen resolution.
If the driver is not to be found under device manager then nothing can be done.
Try updating windows to see if it helps.
Please do get back to us for further information or assistance.
Thanks and Regards,
None of the Dell drivers will work as they are 32 bit only.
Download the driver here opposed to the one you were instructed to: http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_vista64.aspx
Install 7zip 64 bit .msi right click the file and select 7zip > extract to "10-2_legacy_vista32-64_dd_ccc". you will now have a folder called 10-2_legacy_vista32-64_dd_ccc.
Press [Windows] and [Pause|Break] next select Device manager.
Look for the Video Device under display adapters.
Right click the device you wish to update and select Update Driver Software.
Next select browse my computer for driver software
Navigate to the extracted folder 10-2_legacy_vista32-64_dd_ccc, it should search here and all the subfolders for the driver.
Select next, next then finish.
lol. but you didn't put a screenshot of how to turn the computer on. thanks for this detailed post! it is great and you did a step i wasn't doing. i will try this later today and report back my results.
I have the same problem, installation screen starts an then stops in the same moment as yours with Win 8 Pro x64 upgrade. Have you tryed Windows 8 Upgrade Assistant to see if your hardware is compatible with this version of win 8? I have on my old XP OS but my system partition is less than 20gb and it does not let me to go ahead untill I find more space, so I can not tell if it is!
I've tried many methods of install and nothing works. I used the same disk that I used on 6 other computers and each one of them worked fine. I have another computer with the same processor, the only difference is the video card, upgrade assistant says it should work fine, but it will not get past the loading screen. I tried to do an upgrade install today and it rebooted twice, but stuck on the loading screen. I'm starting to believe it will never work.