Highlighted
MaheshAtyam
1 Copper

EMC Management pack configuration issues?

Jump to solution

Hi All,

I have imported EMC Storage Management pack to monitor VNXE devices.

Steps performed:

a) Imported the management pack in SCOM Console.

b) installed ESI service and ESI storage integrator on one server ( with scom agent installed)

c) registered the storage devices in the ESI console and published the same . Able to open the http://IP_OF_EMC_Monitoring_Station:54500/esi/console from the ESI server where console is installed.

d) made changes to registry.

e) created run as account(windows authentication ) and added the local system account over there.

f) Associated the two run as profiles ( EMC SI monitoring account and EMC SI service monitoring account ) with the run as account with class as windows computer as well as health service watcher ( for the server where ESI service and Console is installed)

g) enabled the EMC SI service discovery with override targeted to windows computer  (HTTPS to HTTP ,ESI Service Host IP,port:54500 ,interval 60 as parameters) and separate override to enable the EMC discovery with EMC monitoring host as target.

Issue:-

a) Error id :

1102:

Eventlog:Operations Manager

Rule/Monitor "EMC.SI.ESIService.Discovery" running for instance "EMC monitoring host name" with id ""

cannot be initialized and will not be loaded. Management group

b) Error:- 7000:-

The Health Service could not log on the RunAs account .\Administrator for MG.

The error is Logon failure: unknown user name or bad password.(1326L).  This will prevent the health service from monitoring or performing actions using this RunAs account

verified that passwored is correct.

c) Alert open :-EMC SI Workflow Initialization Failure Alerting Rule

d)Overall topology shows healthy with EMC service connection is drilling down to ESI service host with no further discovery( two component showing up green with no storage device being discovered.)

Any inputs here

Tags (5)
0 Kudos
1 Solution

Accepted Solutions
sddc_guy
3 Argentium

Re: EMC Management pack configuration issues?

Jump to solution

Your Action Account should be a Domain Account with Loacal rights on the Servers.

You might want to Chose the Default Action account or a Specific one only Dostributet to the ESI Hosts

0 Kudos
1 Reply
sddc_guy
3 Argentium

Re: EMC Management pack configuration issues?

Jump to solution

Your Action Account should be a Domain Account with Loacal rights on the Servers.

You might want to Chose the Default Action account or a Specific one only Dostributet to the ESI Hosts

0 Kudos