Start a Conversation

Unsolved

This post is more than 5 years old

J

10073

November 14th, 2008 12:00

2208wfp rev a01

What has changed between rev a00 and rev a01 for the 2208wfp?  Software or hardware changes?

 

Because I just happen to purchase a second 2208wfp, and now I have two LCD monitors, rev a00 and rev a01.

 

If I place them side by side at factory settings, the colors are noticeably different.
rev a00 looks fine, but now rev a01 has some kind of greenish tint.  And no amount of tweaking
in Custom Preset Mode has been able to remove it.  It's almost as if its built into the LCD film.
I've tried using DVI and Analog, but the green tint is still there.

 

1 Rookie

 • 

2.1K Posts

November 14th, 2008 23:00

sorry about my threads, i thought you were buying a 2208wfp-

might try downloading and installing this driver on the monitor with the greenish tint-

23 Posts

November 15th, 2008 11:00

Anything about picture color?

Because all I really want is to have the colors of both monitors to match.

1 Rookie

 • 

2.1K Posts

November 15th, 2008 14:00

1 Rookie

 • 

2.1K Posts

November 15th, 2008 14:00

you might try to update the monitor with the green tint with this driver, and see if it helps-

1 Rookie

 • 

2.1K Posts

November 15th, 2008 14:00

the panel that is used on the 2208wfp-

http://www.tftcentral.co.uk/

23 Posts

November 16th, 2008 09:00

The driver on the installation CD is dated 07/03/2007.  The same CD came with both rev 00 and rev 01.

 

The driver from the Dell website is dated 07/03/2007 too.

 

This is the driver I have installed, and I see no changes since.

 

rev01 came out in 2008, so I don't think this driver could specifically fix anything in it,
since it is after the fact.

No Events found!

Top