Arne Olav
1 Copper

Re: 2408WFP Continued

So no one in europe have received A01 yet?

Report from Norway:

My old A00 received in May 2008, had a pixel error. I read this thread ever since and waited for a new firmware.

Only 20 hours after I contacted support, a refurbished UltraSharp 2408WFP A01 screen was delivered and the old screen taken away. The new screen is marked with an extra ‘REV A01’ tag over the ‘REV A00’ text at the back. Underneath the screen is a green tag with ‘REFURBISHED’. Sharpness adjusts in increment of 10. Better input lag. Both screens are made in Czech Republic.

SoftMCCS reports that A01 is manufactured 2008 week 17, 3 weeks before my old A00.

Still some pink letters with ClearType on, just as on my UltraSharp 2007FP. (Notepad, font: Lucida Console Regular size 10)

I am satisfied with the Dell UltraSharp monitors and the support.

0 Kudos
abzmaz
1 Nickel

Re: 2408WFP Continued

Does the new firmware address the problem of left side 3" brighter than the right side? I have several of these monitors and they all have the same problem. I want to returrn them but would like to know if this particular problem has been fixed. Thanks, Al

0 Kudos
rooophy
1 Copper

Re: 2408WFP Continued

I really wish there was a proper review of the input lag on the A01. I found a great review with numbers on a clone test of the A00 compared with other PVA and TN panels on www.TFTCentral.co.uk (look for the 2408WFP review) but they have not updated it for the A01, at least not with numbers. Has anyone got NUMBERS from a clone test on the input lag of the A01 revision?...
Tags (1)
0 Kudos
Rambler358
3 Silver

Re: 2408WFP Continued

Thanks for your work on this Jimmy! emoticon.Smile.title

0 Kudos
martidi
2 Iron

Re: 2408WFP Continued

Does the new firmware address the problem of left side 3" brighter than the right side? I have several of these monitors and they all have the same problem. I want to returrn them but would like to know if this particular problem has been fixed. Thanks, Al

 

The short answer is: No.

A firmware update only address electronic related issues (Input Lag, sharpness control, power save mode) but not panel related problem.

The long answer is: this is not really a "problem" but a caracteristic of the S-PVA panel implementation in the 2408.

Hope this help.

Martidi aka Brhume

Martidi aka Brhume

0 Kudos
ptysell
1 Copper

Re: 2408WFP Continued

So if I go out and buy a Rev A00 all I have to do is contact customer support and I can exchange the Rev A00 for Rev A01?

0 Kudos
JohnMaij
1 Nickel

Re: 2408WFP Continued

I recently contacted Dell to get my 2408 repaired as it had a red edge on a lot of black text and also effected B/W photos.

 

I was given an exchange  but the 1st one, (marked A02), was just incredible - over 50 dead pixels, awful IQ etc, god knows what had happened to it but beside that the DVI-1 port didn't work; with no cable it did the usual search, add cable it went to sleep and every preset had a very green tint incl sRGB. Using custom RGB the green is too high by exactly 10.

I have now received the 2nd replacement which is marked A00 (though I can adjust the sharpness in 10's) but while the screen is fine the DVI-1 port has exactly the same fault and again all the presets have too much green by 10.

Do new A01 monitors have these issues?

 

0 Kudos
Highlighted
wylie_coyote
1 Copper

Re: 2408WFP Continued

Jimmy,

I had the 2408wfp rev A01for 6 months which had power failures, so i got a replacement sent out yesterday which is a refurbished one and had a A02 sticker on the back but i believe its an A00 as the shapness only goes up by increments of 25 and i think its got the imput lag!

To me that means they have not updated the firmeware at all and just sent me a older version than i already had! Shall i ring up and complain and get another sent out? Whats your advice?? Im not a happy person at the moment.

0 Kudos
Moderator
Moderator

Re: 2408WFP Continued

All A00s have been updated to either A01 or A02. A01 had the Sharpness and Input lag fixed. All A02 added was some HDMI Audio tweaks. Do you see the input lag on this monitor.

0 Kudos
wylie_coyote
1 Copper

Re: 2408WFP Continued

I beleive so and the sharpness goes up by 25% instead of 10, is that a give-away? My Original A01 went up by 10% increments. Whats the easiest way to test imput lag? Drag box around screen?

0 Kudos