steph6838
1 Copper

Monitor P210f not working - warranty

My monitor (dell p210f) is Not working since last saturday I am trying to use the Dell support but i don't know how to find the serial number that i must enter on the web site My s/n is CN-0W416K-72872-0A7-0WGM. Can you help me ?
Tags (1)
0 Kudos
3 Replies

Re: Monitor P210f not working - warranty

Hi steph6838,

From the monitor serial#, I was able to pull some details. It is a Dell P2210F monitor.

Could you please elaborate the issue that you are facing with the monitor.

Do you get any error message?

Please let me know the status of the power LED of monitor.

You can also run a monitor self test by following the steps below: 

  1. Turn off your monitor and reconnect the video cable; then, turn on both your computer and the monitor. 
  2. To ensure the proper self-test process, remove both digital (white connector) and analog (blue connector) cables from the rear side of the computer.
  3. Turn on the monitor. 
  4. A floating message box appears on screen with a black background, if the monitor is working correctly but cannot sense a video signal. While the monitor is in the self-test mode, the power LED remains blue. 
  5. Turn off your monitor and reconnect the video cable; then, turn on both your computer and the monitor. 
  6. If the monitor screen remains blank, check the video controller and the computer.

You can also refer to the manual of the monitor: http://dell.to/Tytnad

Please reply with information. 

Thanks and regards,
DELL-Chinmay S
#IWork4Dell 
To know more about Dell’s products, services and drivers & downloads, please go here

0 Kudos
Moderator
Moderator

Re: Monitor P210f not working - warranty

steph6838,

That monitor does not have a service tag number. If the monitor fails the self test, go back to the top of the Monitors Forum and open the announcement, "No service tag on my monitor?".

0 Kudos
steph6838
1 Copper

Re: Monitor P210f not working - warranty

Hi, thank you for your response

all led monitor are off

The monitor screen remains black and the 5 leds are off

So, there is no floatting message and the self test doesn't start when i turn on the monitor

emoticon.Sad.title

0 Kudos