Unsolved
This post is more than 5 years old
116 Posts
0
2075
AFTD Device query
Hello,
I have created an AFTD device on my Networker (8.1.3.7) server. The AFTD is configured on a linux DSN, on a remote nas share accessed via NFS.
My issue is when I try to mount or label a volume I'm getting an error
Error:
Monitor device operation in progress on rd:ausplsodsnpdr01:nw_ausplsodsnppr01_nfs_db_01
My question is: is there a way to kill this process without stopping/restarting networker services on the networker server ?
Tks,
Liam
gautamgp
226 Posts
0
July 19th, 2016 09:00
Hi Liam,
You have to be more specific, if the process is stuck in NetWorker Management Console, then just kill the process from task manager and reopen the NMC console.
bingo.1
2.4K Posts
0
July 19th, 2016 10:00
If I remember that correctly, this is the message if you have enabled "Auto Media Management". This means tha now the NW server hsa taken control of operating and of course monitoring the device.
Consequently you must disable AMM to re-gain control.
bingo.1
2.4K Posts
0
July 21st, 2016 03:00
You can stop any nsrmmd process at any time. This should have cleared the issue.
Unfortunately,
- there is no way to report which process belongs to which device
- they will be restarted unless you disable the device
lguinane
116 Posts
0
July 21st, 2016 03:00
Dell - Internal Use - Confidential
Hi Gautam,
Thanks for replying.
There is no specific process to kill unfortunately.
lguinane
116 Posts
0
July 21st, 2016 03:00
Dell - Internal Use - Confidential
Thanks for the reply.
I believe the issue started by selecting AMM when creating the device.
Unselecting AMM did not resolve it.
lguinane
116 Posts
0
July 21st, 2016 03:00
The NWBU server was rebooted and resolved the problem, so I was unable to kill the process manually.