Unsolved
This post is more than 5 years old
2 Posts
0
1473
Emc networker : No node/client name in the backup failure email
Dear Experts,
We receive the below email content from the emc networker but there is not no name in this email ,
Is there a possible way to get the node name in the email from emc networker .
[1514734848, 'SYSTEM@qxyz@abc.com, '---Summary notification report---Policy name:Gold Workflow name:VMware-test, Workflow status:failed, Workflow start time:12/31/17 18:00:00, Duration:0 hours 40 minutes 45 seconds Action name:Backup, Action status:failed, Action start time:12/31/17 18:00:00, Duration:0 hours 24 minutes 46 seconds Action name:Clone, Action status:succeeded, Action start time:12/31/17 18:24:52, Duration:0 hours 15 minutes 52 seconds']
bingo.1
2.4K Posts
0
January 15th, 2018 04:00
This is a summary report which makes you aware of an issue. That is the intention. I do not think that NW can be more specific in this mail. But at least you have the starting point for your next investigations.
abhaybhagat08
2 Posts
0
January 15th, 2018 20:00
Dear ,
Thanks for the same , so in short no way to get the node/Client name in the summary report for backup failures
Regards
Abhay
crazyrov
4 Operator
4 Operator
•
1.3K Posts
0
January 16th, 2018 00:00
abhaybhagat08
You might want to set up the notification at the action level to get more information on the failure/success.
HTH