This post is more than 5 years old
17 Posts
0
2290
Networker Module for Microsoft Applications 2.3 Build 87: Exchange 2010 SP2 Rollup1 ¿Supported?
Hi all,
I just wondering if Networker Module for Microsoft Applications 2.3 Build 87 supports Exchange 2010 SP2 Rollup1.
I was having a look to the documentation available, but only finds that Excahnge 2010 SP1 Rollup 2 or later is suppported.
Thanks in advance
guenterH1
117 Posts
0
March 2nd, 2012 00:00
Looks like you are not using the lates version of SW comp. guide.
Did you use this version?
EMC NetWorker
Software Compatibility Guide
February 3, 2012
Nachricht geändert durch guenterH
1 Attachment
Unbenannt.jpg
guenterH1
117 Posts
0
March 1st, 2012 23:00
The current NetWorker software compatibility guide tells different.
Please check page 70 at the top, SP2 is clearly listed to Exchange 2010 support.
Or do I read something wrong?
On the other hand, I know it's working for I have it running myself.
The RU1 to SP2 may be a different thing. This I didn't test myself yet and it isn't listed too.
Bebo2k
544 Posts
0
March 2nd, 2012 00:00
Yes, i was using the version before that one , sorry for that.
Also i found the following Powerlink article , seems that it is supported at the end of January 2012
https://solutions.emc.com/emcsolutionview.asp?id=esg127047
Thanks,
Ahmed Bahaa
shuler
17 Posts
0
March 2nd, 2012 01:00
Hi Ahmed!,
Thanks a lot for the information, at least, the RollUp1 is Not Fully supported as is not available inside the SCG published in Feb. 2010... I have asked to EMC via Powerlink question, so when I have an answer I will give you feedback .
See you soon,
Alexander
shuler
17 Posts
0
March 2nd, 2012 01:00
Hi guenterH,
Sure!, I have read the SCG from Feb. 2012 and nothing realted to SP2 RU1 appeards .
I think that should works, but in case that I have and error I won't have support from EMC.
As I have commented, I have create a SR inside Powerlink to have an officcial answer about this.
I'll keep you updated
See you!,
shuler
17 Posts
0
March 5th, 2012 01:00
It was a pleaseure!
I hope too!...
At this momment, we will upgrade form SP1 to SP2 and let out the RU1 for later.
Regards,
Ahmed_Metwaly
1 Message
0
March 5th, 2012 01:00
Hi shuler,
Thanks for the updates and the information. May be it will be supported by NMM 2.4
Regards,
Ahmed Bahaa
shuler
17 Posts
0
March 5th, 2012 01:00
I have received an official response:
As per KB article http://solutions.emc.com/EMCSolutionView.asp?id=esg127047&usertype=C the NetWorker Module for Microsoft Applications (NMM) version 2.3 (and above) supports the following Support Packs and Update Rollups for Exchange 2010.
SP2
SP1
Update Rollup 6 for Exchange Server 2010 Service Pack 1
Update Rollup 5 for Exchange Server 2010 Service Pack 1
Update Rollup 4 for Exchange Server 2010 Service Pack 1
Update Rollup 3 for Exchange Server 2010 Service Pack 1
Update Rollup 2 for Exchange Server 2010 Service Pack 1
Update Rollup 1 for Exchange Server 2010 Service Pack 1
Service pack 2 Rollup 1 is not currently supported.
“The NMM 2.3 is qualified with Exchange 2010 SP2. Rollup 1 will likely be included in the next round of testing.”
Bye!