Networker for AIX Device configration

Quantum i6000 + AIX 7.6 + Networker 8.x

inquire: Information does not display the changer,but display all tape drivers。Robots need to be specially configured?  

Tags (3)
0 Kudos
4 Replies
ble1
6 Indium

Re: Networker for AIX Device configration

AIX 7.6?  You mean 7.1?  I happen to have one environment with NW 8.0.x, i6000 and AIX 7.1 and it is all fine.  Check if lus is loaded.  Also, make sure you have drivers installed.

0 Kudos

Re: Networker for AIX Device configration

thanks Hrvoje Crvelin!

I'm sorry, wrong will be written in AIX 6.1 to AIX 7.6, ask a question lus is networker automatically generated? Or do you need any special configuration? No clear instructions in the manual.

0 Kudos
ble1
6 Indium

Re: Networker for AIX Device configration

lus is there by automatic (supplied by storage node package).  However, I have seen lus hanging if you do some robotic change so you need to re-init it.  To do this, do:

root:/ # rmdev -l lus

lus Defined

root:/ # mkdev -l lus

lus Available

root:/ # lsdev -C -l lus

lus Available  Legato SCSI User Interface Release 8.0.3.4.Build.356

Don't get confused by version of NW where I used this.  I had 7.6.x before and it was the same story.

Re: Networker for AIX Device configration

Thank you very much for your help!

0 Kudos