Unsolved
This post is more than 5 years old
4 Posts
0
9539
Probe job had unrecoverable failure(s), this job is being abandoned.
We upgraded our networker to 7.61, both server and clients. two of my servers that used to run nsrexeced and do the backup correctly now fail the backup with this error:
Probe job had unrecoverable failure(s), this job is being abandoned on the server side. nothing has been change with the client server's config. and the rest of the servers are woking fine(with the same config) any body knows what this error means and how to remedy it?
thank you in advance
Kathy
ble1
14.3K Posts
1
August 16th, 2011 00:00
Try to figure out why probe is failing by running only probe. Go to client and run following from CLI:
savefs -s -vpn
Above won't do backup - just run probe (which is exactly what fails now) and error should be more clear to get you or us started.
mfriedma
20 Posts
2
August 16th, 2011 00:00
Hello Kathy,
You may want to check the following document that describes in details the probe process and how to troubleshoot it.
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-012-625.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tDb250ZW50RXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNWIzM2RlLGRvY3VtZW50VHlwZT1wZGYsbmF2ZU5vZGU9MGIwMTQwNjY4MDQyNzY2OF9Hcmlk
Hope this helps,
Mickey
kkhagani
4 Posts
0
August 16th, 2011 08:00
Thank you Hrvoje, for the helpfull command line. I ran the command on two servers, one that is working, and the other that I have problem with. here is the results, I don't get any errors.
Problem server: problem-server.txt
good server: good-server.txt
Regards,
Kathy
2 Attachments
good-server.txt
problem-server.txt
kkhagani
4 Posts
0
August 16th, 2011 09:00
Thank you for the great command. the networker manual that Mickey suggested fixed my problem!!
Thank you both
Kathy
kkhagani
4 Posts
0
August 16th, 2011 09:00
the /nsr/res/servers file was pointing to the wrong backup server!
fisher_yxf
14 Posts
0
June 18th, 2014 00:00
But I can't open this Manual Link about 300-012-625.Who can provider?
ble1
14.3K Posts
0
June 18th, 2014 02:00
Check for document on support.emc.com (powerlink data has been migrated long time ago)