I'm facing an issue with the DELL model S5048F that was recently updated. I can't access via SSH and I can't clear VTY sessions with the command "clear line vty x or clear line x"
I ran the cleanup command but it doesn't remove vty line
Solved! Go to Solution.
We still have the issue. We have confirmed on several switches that it is the "ssh service" that is stuck and it is not possible to disable it with the command "no ip ssh server enable".
Unfortunately, the switch we made the ticket with had the support expired, so we could not follow up with the ticket.
Any ideas or solutions?
Apply this command in CLI,
remote-exec cp ps -aux | grep ssh -> list ssh processs
After apply kill in pid process
remote-exec cp kill -9 5940 (pid)
After apply the commands below
no ip ssh server enable
ip ssh server enable
still not working for me, do I need to remove the following PID as well
Jul 11 16:28:04.518 AEST %STKUNIT1-M:CP %CLI-0-REMOTE-EXEC: RCMD: remote-exec CP ps -aux | grep ssh
ps -aux | grep ssh
root 4577 0.0 0.0 0 0 ? Z - 0:00.00 (sshd)
root 12783 0.0 0.0 1860 1012 ttyp1 S+ 6:28AM 0:00.00 grep ssh
root 4529 0.0 0.3 234080 9884 tty01 S+ 20Jun22 42:33.11 sshd: sshd -r
also, if i put this no ip ssh server enable, it will automatically re-enable the ssh
Is there any news about new releases that definitively solve the problem?
We ran the workaround of "killing" the ssh service on a couple of switches and it worked fine for a while, but then the ssh service got stuck again.
As a workaround, we had to enable the telnet service on the switches, which is clearly not the best thing to do.